Built-in Player, Playing a disc, Repeating play

	Receiving traffic announcements	Built-in Player
	TA (traffic announcement standby) lets you re-	Playing a disc
	ceive traffic announcements automatically, no	Playing a disc
	ceive traffic announcements automatically, no	1 Insert a CD into the CD loading slot.
	matter what source you are listening to. TA	1 Insert a CD into the CD loading slot.
	can be activated for both a TP station (a sta-	Playback will automatically start.
	tion that broadcasts traffic information) or an	# Be sure to turn up the label side of a disc.
	enhanced other network’s TP station (a station	# After a CD has been inserted, press SOURCE
	carrying information which cross-references	to select the built-in CD player.
	TP stations).	# You can eject a CD by pressing EJECT.
	1 Tune in a TP or enhanced other net-	2 To perform fast forward or reverse,
	work’s TP station.	press and hold c or d.
	TP indicator will light.	3 To skip back or forward to another
		3 To skip back or forward to another
	2 Press TA to turn traffic announcement	track, press c or d.
	standby on.

Section

English

#To turn traffic announcements standby off, press TA again.

3Use VOLUME to adjust the TA volume when a traffic announcement begins.

The newly set volume is stored in memory and recalled for subsequent traffic announce- ments.

4Press TA while a traffic announcement is being received to cancel the announce- ment.

The tuner returns to the original source but re- mains in the standby mode until TA is pressed again.

Notes

!You can also turn the TA function on or off in the menu that appears with the pressing of

!The system switches back to the original source following traffic announcement recep- tion.

!Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM when TA is on.

Notes

!Read the precautions with discs and player on page 13.

!If an error message such as ERROR-11 is dis- played, refer to Error messages on page 13.

Repeating play

Repeat play lets you hear the same track over again.

1Press FUNCTION to select RPT.

2Press c or d to select the repeat range. DSC – Repeat all tracks

TRK – Repeat just the current track

# If you perform track search or fast forward/re-

verse, repeat play is automatically cancelled.

# To return to the normal display, press BAND.

Random play lets you play back tracks on the CD in a random order.

1Press FUNCTION to select RDM.

2Press a or b to turn random play on or

off.

When random play is on, RDM appears in the

display.

# To return to the normal display, press BAND.