Graco ti18524d, ti18496b, ti18526c specifications Catalyst Slave Pumps, 922 930 940

System Parts

Catalyst Slave Pumps

926 12

910 2	12	8
902 1	4
901

	1	946	932 1	947 1
	1	935
	6	909		903 1	5
	907
1					903a 3

6

911

912 913

			914 8
6	909		915 7	903b	3
	6	908	916	903c

902d

902b13

902f

902a

902g

902f

902e 14

ti19060a

	919		917 8				1	Apply pipe sealant to threads.
	920						2	Apply thread locker to mating surfaces or threads.
			918 9		10		3	Apply grease to mating surfaces or threads.
						Series D only
							4	Torque to 240 in-lb (27.1 N•m).
			920			940 1
	919
						945 1	5	Torque to 225-275 in-lb (25.4-31.1 N•m).
	925		Series D				6	Loop large end of lanyard over gauge prior to
	923		only					assembling gauge. Attach small end of lanyard to
5	921		15 936					split ring on pin.
		1					7	Note orientation of u-cup.
Internal Mix shown
							8	Torque to 30-50 in-lb (3.4-5.6 N•m).
							9	Clean cylinder inner diameter with soft cloth or
								equivalent, prior to assembly.
	922			930		940 1	10	Hand tighten cylinder (918) and bottom out to
					1			housing (901). Back-off cylinder (918) less than 1/2
WLE		924 11						turn. Assembly pin (908).
	924
11							11	Press fit bearings.
External Mix Only							12	Torque piston rod (910) to top link (926) to
								80-100 in-lb (9.0-11.3 N•m).
							13	Torque to 20 - 60 in-lb (2.3-6.8 N•m).
		932 1				946 1	14	Snap 902e onto 902a.
	947	1
								Orient so inside chamfer of nipple (936) is mated to
939							15
								swivel (930).
				937 1		934 1
938			947
		939		1

66 3A2012J