Polycom HDX manual Setting and Using Camera Presets

Page 16

User’s Guide for Polycom HDX Room Systems

Setting and Using Camera Presets

Camera presets are stored camera positions that you can create ahead of time or during a call.

Presets allow you to:

•Quickly point a camera at pre-defined locations in a room.

•Select a video source such as a VCR or DVD player, a document camera, or an auxiliary camera.

If your system’s camera supports pan, tilt, and zoom movement, you can create up to 100 preset camera positions (0-99) for the near site. Each preset stores the camera number, its zoom level, and the direction it points. These presets remain in effect until you delete or change them.

If far-site camera control is allowed, you can create up to 16 presets (0-15) for the far-site camera. These presets are saved only for the duration of the call. You might also be able to use presets that were created at the far site to control the far-site camera.

To move the camera to a stored preset:

1If a call is connected, press Near or Far on the remote control , and then choose a near-site or far-site camera.

2Press a number on the remote control. Depending on how your system is

configured, you might need to press	Preset before you press a
number.

To view your near-site presets:

>>Press Preset on the remote control.

Icons for presets 0-9 are shown on the screen. The colored icons indicate stored camera positions, and the gray icons indicate unassigned presets.

To store a preset:

1If you are in a call, press Near or Far on the remote control , and then choose a near-site or far-site camera or other video source.

2With the camera in the desired position, press and hold a number to store the preset position. To store a double-digit preset, press the first digit

quickly and hold the second number down. Any existing preset stored at the number you enter is replaced. Depending on how your system is configured, you might need to press Preset before you press a number.

The system uses preset 0 as the default camera position.

12	Polycom, Inc.

Image 16

Contents User’s Guide for Polycom HDX Room Systems USA Contents User’s Guide for Polycom HDX Room Systems User’s Guide for Polycom HDX Room Systems Using the Remote Control Powering the System On and Off Power On Self Test PostCalling and Answering Answering a CallPlacing a Call Calling by Entering a Name or NumberCalling from the Recent Calls List Calling a Speed Dial Entry Select System Utilities Calendar from the Home screenTypes of Video Calls You Can Make Ending a CallFrom You can call By dialing Participating in an Encrypted Call Points to note about special dialing scenariosControlling What You See Selecting and Adjusting a Camera or Other Video SourceNear or To adjust a Polycom EagleEye View camera Starting and Stopping Camera Tracking with EagleEye Director Setting and Using Camera Presets Enabling Dual Monitor Emulation Switching Between Full-Screen Video and the Home ScreenScroll to Dual Monitor Emulation and press Last layout viewed is used for the next call Showing, Moving, and Turning Off the PIP Select this setting To show the PIP Specifying When to Display the PIPDisplay to Adjusting Volume Controlling What You HearMuting the Microphone Points to note about muting the microphoneShowing Content Showing Content with People+Content IPPoints to note about People+Content IP Enjoying Stereo Audio in Video CallsResolution Refresh rates Hz Resolution Polycom HDX 9004, Polycom HDX 9002, Polycom HDX 9001systemsShowing Content from a Document Camera, VCR, or DVD Player Showing Content with Polycom People on Content Select People on ContentWorking with Directory Entries and Favorites Using the Polycom UC BoardControlling Recording Devices Searching the Directory Adding, Editing, and Deleting Favorites Setting DescriptionSelect Options Add a Contact Select Create Contact Select Add from Directory Points to note about deleting contactsDirectory Groups Choose Options Add to FavoritesSelect Options New Group Points to note about groupsRefreshing Entries from the Polycom Global Directory Server Select Group Polycom GDS Select Options RefreshContacts with Presence Including Multiple Sites in CallsIcon Presence Description Placing a Multipoint Call Passwords for Multipoint Calls Multipoint Viewing ModesSystems with See this Click Place a Call Using Chair Control for Multipoint CallsHosted by Allows chair control if Temporarily Refusing Calls Changing the Way Calls Are AnsweredMuting Automatically Answered Video Calls Answering Video Calls AutomaticallyScroll to Mute Auto Answer Calls and press Logging In and Out Allowing Video Display on the WebScroll to Allow Video Display on Web and press Keyboard onPress the Answer soft key on the conference phone Using Polycom Conferencing for Microsoft Outlook User’s Guide for Polycom HDX Room Systems Icon Presence State Description Muting in a Cccp Call Using Avaya Network Features with Video Calls Customizing Your Workspace Allowing the Far Site to Control Your CameraDisplaying the Far Site’s Name When the Call Connects Hearing Audio Confirmation When You DialAdjusting for Room Lighting Scroll to Keypad Audio Confirmation and pressPolycom Solution Support Scroll to Backlight Compensation and press

Related manuals

Manual 1 pages 18.91 Kb