Polycom HDX Specifying When to Display the PIP, Display to, Select this setting To show the PIP

User’s Guide for Polycom HDX Room Systems

To show, move, or turn off the PIP during a call:

•Press Display on the remote control to display the PIP on screen.

•	While the PIP has a yellow border, press	Display repeatedly to move
	it to different corners of the screen.
•	After a brief pause, the PIP border turns blue. Then, press		Display to
	turn the PIP off.

To swap the views shown in the PIP and the main screen:

1 If the PIP is not showing, press	Display on the remote control to
display the PIP on screen.

2Press Camera and select the Swap PIP icon.

Specifying When to Display the PIP

Your system might be configured with specific default behavior for the PIP in calls. If your system administrator has allowed access to user settings, you can show, move, or hide the PIP as needed after a call connects.

To specify when to display the PIP:

1Select System from the Home screen.

2Select User Settings from the System screen.

3 Select Next to see more settings.

4 Scroll to PIP, press , and select one of these settings:

Select this setting...	To show the PIP...
Camera	When you press any of the camera control buttons.
On	On connection and during the call.
Off	Only when you press	Display on the remote control.

5Press Home to save your change and return to the Home screen.

16 Polycom, Inc.