User’s Guide for Polycom HDX Room Systems
Using the Polycom UC Board
By using the Polycom UC Board™ stylus and receiver with a USB hub and either a standard whiteboard and projector or
To use the UC Board with your Polycom HDX system:
1Ensure that the monitors or projector is powered on.
2Tap the stylus on the content monitor (second monitor) or whiteboard, or begin drawing with the stylus.
The following HDX systems, running software version 3.0.3 or later, support the UC Board:
•Polycom HDX 7000 HD system with Hardware Version C
•Polycom HDX 8000 HD system with Hardware Version B
•Polycom HDX 9006
For information about setting up and getting started with the UC Board, refer to the Quick Start Guide for the Polycom® UC Board™.
Controlling Recording Devices
Depending on how your system is configured, you might be able to use the Polycom HDX remote control to control devices such as VCRs or DVD players that are in the room with the system. You might also be able to control a Polycom RSS 2000 server or Polycom RMX® system. The remote control buttons control these systems by sending audible DTMF tones across the call. The Polycom RMX must be configured to use the default DTMF codes assigned to the recording process. Contact your system administrator for more information.
Working with Directory Entries and Favorites
The directory on your Polycom HDX system stores dialing information that helps you make calls quickly and easily. When a site listed in the directory calls your system, the system displays the name on the screen when the call comes in. If a site that calls you is not listed in the directory, you might be prompted to save the contact information in the directory when the call ends.
If your system is registered with a global directory server, you can see information about other active sites that are registered with the same Global Directory Server. These entries are stored on the Global Directory Server, and you cannot edit them. You can, however, add a global entry to your Favorites.
Polycom, Inc. | 23 |