AKG Acoustics C747 V11 manual Interfacing

3 Interfacing
The C 747 V11 is a condenser microphone and therefore needs a power supply.	3.1 General
The microphone provides a balanced output on a 3-pin male XLR connector:
Pin 1: ground
Pin 2: hot
Pin 3: return
You can connect the microphone to balanced microphone inputs with or without	Refer to sections
phantom power. AKG phantom power supplies allow you to connect the micro-	3.2 and 3.3 below.
phone to unbalanced inputs as well.

	3.2 Balanced Input
	with Phantom Power
	3.2
	C 747 V11
C 747 V11	B 18
	3.3
	Fig. 1: Connecting to
	a balanced input.

1. Use an XLR cable to connect the microphone to a balanced XLR input with Refer to fig. 1. phantom power.

2.Switch the phantom power on. (Refer to the instruction manual of the unit to which you connected your C 747 V11.)

• If your mixer provides no phantom power, connect an optional AKG B 18 phan-	3.3 Balanced Input
tom power supply between the microphone and the mixer.	with No Phantom Power
	Refer to fig. 1 above.

C 747 V11 B 18

3.4 Unbalanced Input

Fig. 2: Connecting to an unbalanced input.

You may connect the AKG B 18 phantom power supply to an unbalanced input as Refer to fig. 2 above. well.

• Refer to the instruction manual of the B 18 phantom power supply.

C 747 V11 15