CD Player Features

1.OPEN/CLOSE (Disc Tray Open/Close) - Press to load or eject the disc. Each press will open or close the disc tray on the transport. NOTE: Tray will not open unless the disc has been paused. Tray will automatically close after 30 seconds.

2.TIME (Time Button) - Switches the time display between elapsed playing time and remaining time on the track and remaining time on the entire CD.

3.CONT/SING - Will cause just a single track to play or all tracks in order by pressing once or twice.

4.LCD DISPLAY - Indicates all the functions, as they are occurring, with the CD. These functions are explained in the next section.

5.TRACK (Track Buttons) - Used to select the track to be played.

6.Track 10 Button - This button is for quickly advancing to higher tracks on a CD.

7.PROGRAM - Depress this button and the unit will stop and the program indicator will light. Select each track to be programmed and press the PROGRAM button between selections. You can program up to 20 tracks. Press PLAY to start the program. To exit and erase program, either hold the program button down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.

8.PITCH (Pitch Button) - Activates the Pitch Slider.

9.PITCH SLIDER - The pitch can be changed up to +/-16% by pressing the PITCH button so the PITCH LED is lit, then moving the sliding fader. The pitch will not be changed if the PITCH LED is off.

10.SEARCH WHEEL (OUTER RING) - 3 forward and 3 reverse speed positions for searching through songs. The more you turn the wheel in either direction the faster you search through the music.

11.PITCH BEND/JOG WHEEL (INNER RING) - The jog wheel serves 2 functions depending on the current mode.

a)The jog wheel will control a slow frame search when the CD is not playing. To set a new frame cue point, spin the wheel then press play when you have determined the proper position. Press CUE to return to the “CUE POINT”.

b)When both CD players are playing a CD, the pitch bend function allows the positioning of the bass beats to be matched after the pitch of each disc is matched. Either player can “catch up” or “fall back” to match the other player. The jog wheel will temporarily bend the pitch of the music if the song is already playing by rotating the wheel clockwise to speed up or counterclockwise to slow down. By changing the pitch of one disc with respect to the pitch of the other disc, the beats can be matched.