EXAMPLE OF MIXING USING BOTH PLAYERS OF YOUR CD PLAYER
While playing a disc on PLAYER 1, load a disc into PLAYER 2 and select your next track, match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2.
Load a disc in PLAYER 1 and select the track and press PLAY.
Load a disc in PLAYER 2 and
select the track then play.
Set and edit a start cue point on
PLAYER 2
Check your new cue point
Do a MIX!
PLAYER 1
Loa d a dis c a nd pres s the
OPEN/CLOS E button.
PLAYER 2
Loa d a dis c a nd pres s the
OPEN/CLOS E button.
PLAYER 2
Pre s s the Pa us e button of PLAYER 2.
PLAYER 2
Lis te n with the monitor a nd press the play button.
PLAYER 2
With a matching downbeat from Player 1 press the play button.
PLAYER 1
Select the track to be played.
PLAYER 2
Select the track to be played.
PLAYER 2
Rapidly search for a cue point using the outer wheel
PLAYER 2
Press the cue button then play to be sure of the set cue point.
PLAYER 2
If you are beat mixing, turn on your Pitch adjust and follow the directions for beat matching.
PLAYER 1
Press the PLAY button
PLAYER 2
Press the PLAY button
PLAYER 2
Slowly set the right cue point using the inner wheel
PLAYER 2
Reset the player to the Cue point by pressing Cue
MIXER
When you are happy with your mix move the crossfader accordingly.
9