12.CUE - Pressing the CUE button during play provides a return to the position at which play was started. If PAUSE is used before CUE, that will become the cue point. Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times. The CUE LED will light up from the time the CUE button is pressed until the CD has been reset to the position at which play was started. Steady lighting of this LED indicates the ready condition.
13.START/PAUSE (Play/Pause Button) - Each press of the Play/Pause Button causes the operation to change from play to pause or from pause to play.
14.BPM/PITCH BUTTON - Switches the mode of the display between showing the BPM and the percentage change in pitch.
15.TAP BUTTON - Tap this button with the beat of the music to determine the current Beats Per Minute (BPM).
LCD DISPLAY FEATURES
1.PLAY: Active while the unit is actually playing a CD.
2.PAUSE: Active when the unit is paused.
3.CUE: Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point.
4.PROGRAM: Used for pre- programming the track order to automatically be played by the unit. This is a great function if you need to leave the CD player alone.
5.TIME MODE: (Elapsed) is for showing time as it is taking place.(Remain) shows how much time is left on a particular track. This function is controlled by the TIME BUTTON.
6.SINGLE: Shows when the unit is set to play just one track at a time. When this is not lit, the CD will play continuously through all tracks. This function is controlled by the
SING/CONT BUTTON.
7.PITCH: Is lit when the PITCH BUTTON is active.
8.TIME BAR: Shows either time remaining or elapsed depending on the setting of the TIME BUTTON.
9.PITCH/BPM: Shows the percentage change in pitch or current BPM.
10.TRACK: Shows the current track that the unit is playing.
11.MINUTES: Shows the minutes elapsed or remaining depending on mode setting.
12.SECONDS: Shows the seconds elapsed or remaining depending on mode setting.
13.FRAMES: The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting.
6