Peavey SRC 4026 FC Tape Out Level, Tape Input/Output, Tape Input Level, Tape Assign, PFL Active

39

41

44

46

40

42

43

45

48

47

39. Tape Out Level

Sets the level of the main left and right stereo signal

sent to the tape output jack. It is post master fader.

40. Tape Input/Output

One half of this stereo RCA phono jack provides a signal for the recording inputs of a stereo tape deck, with an amplitude set by the Tape Output Level control (#39). The other half accepts a stereo input (nominally -10 dBu) from the output of a tape deck or CD player.

Caution: The tape output signal includes the tape input signal, which can cause feedback if the Tape Input

Level (#41) is turned up while recording on a single machine that is connected to both the tape output

and tape input jacks.

41. Tape Input Level

Adjusts the level of the tape signal (#40) supplied to the L-R mix and to the AUX 1 & 2 buses.

42. Tape Assign

Adds a mono sum of the tape signal to the AUX 1 &

2 mixes. This can be used to send the tape signal to monitors for soundtrack monitoring. The tape signal is always assigned to the L-R mix, regardless of this switch’s position.

43. Talkback Assign

Selects which outputs will have the talkback mic signal (L-R or AUX 1-4) for house or monitor feeds.

44. Talkback Enable

Press and hold to engage the talkback mic. The out- put is directed according to the assignment selection. (See #43.)

45. Talkback Level

Adjusts the level of the talkback mic. This affects the feed to the L-R and AUX 1-4.

46. PFL Master Level

Sets the level of the PFL mix that is sent to the headphone/control room level control. Functions only when PFL is active. (See #47.)

47. PFL Active

This LED illuminates when the PFL is active and its signal is overriding the standard L-R mix in the headphone and control room outputs and at the L-R meters. The signals that are present in the PFL mix can be seen by the individual LEDs lit.

48. Headphone/Control Room Level

Adjusts the volume of the headphone and control room outputs. The output changes from the L-R mix (post fader) to the PFL mix whenever the PFL is active.

Page 8