Cal Flame 3000 owner manual Installation of NEW Access Doors, Installing Access Doors

Owner’s Manual Installation of New Access Doors

INSTALLATION OF NEW ACCESS DOORS

Installing Access Doors

1.Provide cut out and door jamb with inside dimensions as follows:

16 1/4" X 19 “ for single door

28 1/4” x 19 3/8” for double door

2.Secure the steel frame with 16 screws of type #10 x fl” truss head phillips S/S.

3.Attach doors to frame.

4.Adjust doors as follows:

a)For height adjustment, loosen the two screws attached to each mounting plate.

b)Snap off hinge and secure mounting plate with #6 X 1” flat phillips S/S.

c)For side adjustment turn screw to increase or decrease door overlay.

d)For depth adjustment, loosen screw, adjust door to desired position and retighten screw.

30"

19"

Front Dimensions

23"23"

Double Access Door

Single Access Door

28 1/4"

16 1/4"

19"

19 3/8"

Rear Cut-Out Dimensions

Single Door

Width	18 1/4"
Height	19"
Depth	2 1/2"
Double Door
Width	28 1/4"
Height	19 3/8"
Depth	2 1/2"

Figure 34. Access Door Installation

Page 31 Owner’s Manual