Cal Flame 3000 Operating the DVD System In TV Mode, Instructions, Switching Back to DVD Operation

Owner’s Manual Accessories

Operating the DVD System In TV Mode:

Figure 46. DVD Player

The DVD system is used to feed the audio signal from the TV Tuner to the stereo. You will need to switch the audio and Video modes with DVD remote to properly receive picture and sound.

NOTE: The Stereo must be tuned to 88.7FM to receive audio signals from either the DVD or TV Tuner.

Instructions:

1.Turn on DVD system as mentioned on the previous pages.

2.Press the SELECT button on the TV Remote Control to switch Video to COMPOSITE TV.

3.Press the A/V button on the DVD Remote Control to switch the Video from OUT to IN.

4.Press the Channel Up or Down buttons on the TV remote control to select TV Channel.

Switching Back to DVD Operation:

1.Press the SELECT button on the TV Remote Control to switch Video to COMPOSITE VIDEO.

2.Press the A/V button on the DVD Remote Control to switch the Video from IN to OUT.

3.Press the PLAY on the DVD remote Control.

WARNING: DVD System, Tuner System and their remote control’s are NOT waterproof or water-resistant. Water damage is not covered by the manufacturers warranty. Please make sure that hands and DVD’s are dry before coming in contact with this or any electronic option.

Page 53 Owner’s Manual