Invacare Top End T-3 manual Stairways

Page 17

GENERAL GUIDELINES

PROCEDURE 1

 

 

WARNING

When lowering the front caster of the wheelchair, DO NOT let the wheelchair drop the last few inches to the ground. This could result in injury to the occupant and/or dam- age to the wheelchair.

Roll the wheelchair backward and SLOWLY lower the wheelchair in one continuous move- ment. DO NOT let the wheelchair drop the last few inches to the ground. This could re- sult injury to the occupant.

STAIRWAYS

WARNING

ALWAYS wear your seat positioning strap. Inasmuch as the SEAT POSI- TIONING STRAP is an option on this wheelchair (You may order with or without the seat positioning strap), Invacare Top End strongly recommends ordering the seat positioning strap as an additional safeguard for the wheel- chair user.

Invacare Top End does not recommend these wheelchairs be transported up or down stairways with occupant in the wheelchair. Possible injury to occu- pant and/or assistant(s) can occur. Transfer to an everyday use wheelchair is recommended.

DO NOT attempt to lift the wheelchair by on any removable (detachable) parts. Lifting by means of any removable (detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair.

Extreme caution is advised when it is necessary to move an occupied wheel- chair up or down a stairway. Invacare Top End recommends that, if possible, the user be removed from the chair prior to moving. Invacare Top End rec- ommends using two (2) assistants and making thorough preparations. Make sure to use ONLY secure, non-detachable parts for hand-hold supports.

GENERAL GUIDELINES

Part No. 1054916

17

T-3™ and T-4™ Series

Image 17
Contents Owners Operator And Maintenance Manual Special Notes Special NotesTable of Contents Register Your Product Name Address Complete and mail this formZip/Postal Code Email Phone No Invacare Model No. Serial NoFold here Cut Along Line Typical Product Parameters Typical Product ParametersSee current order form 250 lbs See current order form Stability Procedure General GuidelinesGeneral Guidelines Stability WarningsGeneral Warnings Continuted Tire Pressure Weight TrainingWeight Limitation Stability and Balance SAFETY/HANDLING of WheelchairsPercentage of Weight Distribution Procedure General Guidelines Coping with Everyday ObstaclesFunctional Reach from a Wheelchair Adjustable Models OnlyGuidelines Shortening FrontDo not tilt the chair without assistance TiltingStairways Transferring to and from Other Seats ESCALATORS? SorrySafety Inspection Safety Inspection ChecklistSafety Inspection Safety Inspection Checklist Safety Inspection Procedure MaintenanceMaintenance Safety Precautions Suggested Maintenance ProceduresProcedure Back ADJUSTING/REPLACING Back Upholstery FigureAdjusting Back Upholstery BackReplacing Back Upholstery Folding Back FigureBack Angle Adjustment Figure Back Height Adjustment FigureHole Number 11-14 14-18 16-20Back Angle to Seat Rail Seat Seat Upholstery Replacement FigureProcedure Seat Rear Seat to Floor Range in Inches Rear Seat Height AdjustmentFront Seat Height Adjustment Before Front Seat Height AdjustmentRigid Clothing Guard Replacement Figure Nylon Clothing Guard with Plastic Insert Replacement FigureClothing Guards ClothingProcedure Wheels REMOVING/INSTALLING Rear Wheels FigureWheels Quick or QUAD-RELEASE AxlesREMOVING/INSTALLING Rear Wheels Adjusting QUICK-RELEASE Axles FigureInstalling Figure INSTALLING/ADJUSTING QUAD-RELEASE AxlesRemoving Play From Rear Wheels Adjusting FigureAdjusting Quad-Release Handles In And/Or Out Do not inflate tire until handrim is completely assembled Handrim Replacement FigureREPAIRING/REPLACING Rear WHEEL, TIRE/TUBE Open Position OPENING/CLOSING Clamps FigureQUICK-RELEASE Lever Standard Closed Position Detail a Measuring the Centerlines TOP View Determining TOE IN/TOE OUT FigureWheelchair Front WheelchairCamber Inserts Adjusting TOE IN/TOE OUTOr 12 Camber Or 6/12 Camber InsertsWheels Axle Tube Will Rotate UP Only Elite and T-4 Models with Fixed Camber Figure Adjusting Rear Wheel Camber FigureRequired Camber Insert AdjustmentDetail a Measuring Frame Bracket Distance Adjusting Wheelbase Length Adjusting Center GravityCamber Tube Adjusting Wheelbase Width FigureAdjusting Wheelbase Width A-4 Camber Tube Replacing Axle Tube Figure Adjusting Wheelbase Width Camber TubeReplacing Axle Tube Adjusting Front Caster Height Figure Front Caster Replacement FigureInstalling Quick Release Casters Installing QUICK-RELEASE Casters FigureReplacing the HIGH/LOW Mount Wheel Lock Wheel Lock ADJUSTMENT/REPLACEMENT FigureAdjusting the HIGH/LOW Mount Wheel Locks Footrest Procedure FootrestWheelchair Frame Mounting Bracket Hex Screw Height Adjustment Procedure Footrest Adjusting FootrestDepth Adjustment Tennis Elite Individual Footplates Before 4/2000 Figures 2Changing Footplate Depth Footrest Procedure Changing Footplate AngleChanging Footplate Height Repositioning FootplateInstalling Footplates Procedure Footrest Removing FootplatesRemoving Footplate System Mounting Clamp Replacing Footplate Mounting Bracket3 Tennis Elite Individual Footplates Footrest ProcedureReplacing Individual Footplates Tennis Adjustable Footrest System Before 4/2000 FigureAdjusting Individual Footplates Replacing Seat Adjustment Weldment Footrest Procedure Replacing Footplate WeldmentProcedure Footrest Optional ANTI-TIPPER Procedure REPLACING/ADJUSTING Fixed ANTI-TIPPER Swivel CasterReplacement Elite and T-4 Elite with Fixed Camber Tube FigureAssembleddisassembled AdjustingANTI-TIPPER INSTALLING/ADJUSTING Removable ANTI-TIPPEROptional Anti-Tipper Push Mounting Holes Warranty WarrantyCanada