Invacare Top End T-3 manual Anti-Tipper Push Mounting Holes

OPTIONAL ANTI-TIPPER

PROCEDURE 8 OPTIONAL ANTI-TIPPER

ALL T-3 ELITE MODELS WITH ADJUSTABLE AXLES AND T-3 ADJUSTABLE MODELS MANUFACTURED BEFORE 2001 (FIGURE 3)

1.Press in the two (2) push pins on the anti-tipper and insert the anti-tipper into the chair frame.

2.Position the NEW anti-tipper to one (1) of two (2) mounting holes depending upon the position of the adjustable axle position camber bar.

NOTE: A 1-1/2 to 2-inch clearance between the bottom of the anti-tipper wheels and the floor must be maintained.

Anti-Tipper

Push

Mounting Holes

FIGURE 3 - INSTALLING/ADJUSTING REMOVABLE ANTI-TIPPER - ALL T-3 ELITE MODELS WITH ADJUSTABLE AXLES AND T-3 ADJUSTABLE MODELS MANUFACTURED BEFORE 2001

T-3™ and T-4™ Series 62 Part No. 1054916