Invacare Top End T-3 manual Adjusting TOE IN/TOE OUT, Camber Inserts

WHEELS PROCEDURE 6

ADJUSTING TOE IN/TOE OUT

DEGREE OF CAMBER HAS BEEN CHANGED - T-3 ADJUSTABLE MODELS AND T-3 ELITE MODELS WITH ADJUSTABLE CAMBER TUBES ONLY

Axle Tube Positioning For 0°/3°, 0°/6°, 3°/6° Or 9°/12° Camber Inserts (FIGURE 8).

CAUTION

DO NOT rotate the axle tube if the axle tube is locked out by the toe adjust- ment rings. If a locked out axle tube is rotated, damage to the toe adjustment rings will occur.

NOTE: Refer to AXLE TUBE POSITIONING FOR 0°/3°, 0°/6°, 3°/6° or 9°/12° CAMBER INSERTS in FIGURE 8 for a description of a locked out axle tube.

There is NO adjustment required to maintain a correct toe in/toe out measurement.

NOTE: The axle tube will be locked out by the toe adjustment rings and will NOT rotate.

AXLE TUBE POSITIONING FOR 0°/3°, 0°/6°, 3°/6° OR 9°/12°

CAMBER INSERTS

NO ADJUSTMENT REQUIRED

Right Tab Stopped Against Upper

Metal Tab on Frame Bracket

Toe Adjustment Ring

Left Tab Stopped Against

Lower Metal Tab on

Frame Bracket

Toe

Adjustment

Ring

Axle Tube - LOCKED OUT by

Toe Adjustment Rings and Will

NOT Rotate

FIGURE 8 - ADJUSTING TOE IN/TOE OUT - DEGREE OF CAMBER HAS

BEEN CHANGED

WHEELS

Part No. 1054916 37 T-3™ and T-4™ Series