Invacare Top End T-3 manual Assembleddisassembled, Adjusting

OPTIONAL ANTI-TIPPER

PROCEDURE 8 OPTIONAL ANTI-TIPPER

T-3 TITANIUM AND T-4 TITANIUM ONLY(FIGURE 2)

Replacement.

1.Loosen the set screw on the anti-tipper headtube.

2.Slide the swivel caster down and out of the head tube.

3.Insert the new swivel caster up through the head tube.

4.Adjust the swivel caster. refer to adjusting in this procedure.

Adjusting.

1 Loosen the set screw on the anti-tipper headtube.

2.Adjust the anti-tipper swivel caster to 1/2 to 1/4-inches from the floor.

3.Tighten the set screw on the anti-tipper headtube.

ASSEMBLEDDISASSEMBLED

Headtube Headtube

Set Screw

Swivel Caster

Swivel Caster

Rear Swivel Caster

1/4 to 1/2-inch

Clearance

FIGURE 2 - REPLACING/ADJUSTING FIXED ANTI-TIPPER SWIVEL CASTER

- T-3 TITANIUM AND T-4 TITANIUM ONLY

T-3™ and T-4™ Series 60 Part No. 1054916