FOOTREST
PROCEDURE 7 | FOOTREST |
|
|
T-3 TENNIS ADJUSTABLE FOOTREST SYSTEM - BEFORE 4/2000 (FIGURE 4)
WARNING
The position of the footrest, camber tube and rear seat height, as well as the tautness of the back upholstery are directly related to the chairs stability. Any change to one (1) or any combination of the four (4) may cause the chair to decrease in stability. Use EXTREME caution when using a new seating posi- tion.
ADJUSTING INDIVIDUAL FOOTPLATES
Height.
1.Loosen the two (2) set screws that secure the footrest weldment to the seat adjustment weldment.
2.Position the footplates to a height that is comfortable for the user.
3.Securely tighten the two (2) set screws that secure the footrest weldment to the seat adjustment weldment.
Angle.
1.Loosen the button screws and locknuts that secure the half clamps to the footrest weldment.
NOTE: The footplate clamps are located under the footplates.
2.Position footplates to an appropriate angle for user.
3.Securely tighten the button screws and locknuts that secure the half clamps to the footrest weldment.
Depth.
1.Remove the two (2) button screws and locknuts that secure the footplates to the half clamps.
2.Adjust the footplates to one (1) of five (5) depths.
3.Line up the mounting holes in the footplates with the mounting holes in the footplate clamps.
4.Install the button screws into the mounting holes and tighten securely with the locknuts.
REPLACING INDIVIDUAL FOOTPLATES
1.Remove the two (2) button screws and locknuts that secure the footrests to the footplate clamps.
2.Align new footplates on the footplate clamps at the desired depth.
3.Line up the mounting holes in the footplates with the mounting holes in the footplate clamps.
4.Install the button screws into the mounting holes and tighten securely with the locknuts.
56 | Part No. 1054916 |