Invacare Top End T-3 manual INSTALLING/ADJUSTING QUAD-RELEASE Axles, Installing Figure

Page 32

WHEELS

PROCEDURE 6	WHEELS

INSTALLING/ADJUSTING QUAD-RELEASE AXLES

INSTALLING (FIGURE 3)

1.Remove rear wheel and the existing quick-release axle from the chair.

2.Depress detent pin in the quick-release axle and slide the quick-release axle through the wheel hub.

3.Insert NEW quad-release axle through the rear wheel.

4.Turn the rear wheel over and slide the locking collar onto the quad-release axle and tighten securely.

5.Reinstall rear wheel and quad-release axle onto chair.

6.Flip the handle of the quad-release axle down to release the detent pin ensuring that the locking pins are fully released.

WARNING

Make sure detent pin and locking pins of the quick-release axles are fully re- leased BEFORE operating the wheelchair.

Keep locking pins clean.

7.If any adjustments are needed, refer to ADJUSTING THE QUAD-RELEASE AXLE in this procedure of the manual.

Quad-Release Axle Handle

Allen Screw

Camber Insert

Rear Wheel Hub

Locking Collar

Detent Pin

FIGURE 3 - INSTALLING QUAD-RELEASE AXLES

T-3™ and T-4™ Series

32

Part No. 1054916

Image 32

Contents Owners Operator And Maintenance Manual Special Notes Special NotesTable of Contents Register Your Product Complete and mail this form Name AddressZip/Postal Code Email Phone No Invacare Model No. Serial NoFold here Cut Along Line Typical Product Parameters Typical Product ParametersSee current order form 250 lbs See current order form Procedure General Guidelines StabilityGeneral Guidelines Stability WarningsGeneral Warnings Continuted Tire Pressure Weight TrainingWeight Limitation SAFETY/HANDLING of Wheelchairs Stability and BalanceProcedure General Guidelines Coping with Everyday Obstacles Percentage of Weight DistributionAdjustable Models Only Functional Reach from a WheelchairGuidelines Shortening FrontTilting Do not tilt the chair without assistanceStairways ESCALATORS? Sorry Transferring to and from Other SeatsSafety Inspection Safety Inspection ChecklistSafety Inspection Safety Inspection Checklist Maintenance Safety Inspection ProcedureMaintenance Safety Precautions Suggested Maintenance ProceduresADJUSTING/REPLACING Back Upholstery Figure Procedure BackAdjusting Back Upholstery BackFolding Back Figure Replacing Back UpholsteryBack Height Adjustment Figure Back Angle Adjustment FigureHole Number 11-14 14-18 16-20Back Angle to Seat Rail Seat Seat Upholstery Replacement FigureProcedure Seat Rear Seat Height Adjustment Rear Seat to Floor Range in InchesFront Seat Height Adjustment Front Seat Height Adjustment Before Nylon Clothing Guard with Plastic Insert Replacement Figure Rigid Clothing Guard Replacement Figure Clothing Guards ClothingREMOVING/INSTALLING Rear Wheels Figure Procedure WheelsWheels Quick or QUAD-RELEASE AxlesAdjusting QUICK-RELEASE Axles Figure REMOVING/INSTALLING Rear WheelsINSTALLING/ADJUSTING QUAD-RELEASE Axles Installing FigureRemoving Play From Rear Wheels Adjusting FigureAdjusting Quad-Release Handles In And/Or Out Do not inflate tire until handrim is completely assembled Handrim Replacement FigureREPAIRING/REPLACING Rear WHEEL, TIRE/TUBE Open Position OPENING/CLOSING Clamps FigureQUICK-RELEASE Lever Standard Closed Position Determining TOE IN/TOE OUT Figure Detail a Measuring the Centerlines TOP ViewWheelchair Front WheelchairAdjusting TOE IN/TOE OUT Camber InsertsOr 6/12 Camber Inserts Or 12 CamberWheels Axle Tube Will Rotate UP Only Adjusting Rear Wheel Camber Figure Elite and T-4 Models with Fixed Camber FigureCamber Insert Adjustment RequiredAdjusting Wheelbase Length Adjusting Center Gravity Detail a Measuring Frame Bracket DistanceCamber Tube Adjusting Wheelbase Width FigureAdjusting Wheelbase Width A-4 Camber Tube Adjusting Wheelbase Width Camber Tube Replacing Axle Tube FigureReplacing Axle Tube Front Caster Replacement Figure Adjusting Front Caster Height FigureInstalling QUICK-RELEASE Casters Figure Installing Quick Release CastersReplacing the HIGH/LOW Mount Wheel Lock Wheel Lock ADJUSTMENT/REPLACEMENT FigureAdjusting the HIGH/LOW Mount Wheel Locks Procedure Footrest FootrestWheelchair Frame Mounting Bracket Hex Screw Procedure Footrest Adjusting Footrest Height AdjustmentDepth Adjustment Tennis Elite Individual Footplates Before 4/2000 Figures 2Footrest Procedure Changing Footplate Angle Changing Footplate DepthChanging Footplate Height Repositioning FootplateProcedure Footrest Removing Footplates Installing FootplatesRemoving Footplate System Mounting Clamp Replacing Footplate Mounting BracketFootrest Procedure 3 Tennis Elite Individual FootplatesReplacing Individual Footplates Tennis Adjustable Footrest System Before 4/2000 FigureAdjusting Individual Footplates Footrest Procedure Replacing Footplate Weldment Replacing Seat Adjustment WeldmentProcedure Footrest REPLACING/ADJUSTING Fixed ANTI-TIPPER Swivel Caster Optional ANTI-TIPPER ProcedureReplacement Elite and T-4 Elite with Fixed Camber Tube FigureAdjusting AssembleddisassembledANTI-TIPPER INSTALLING/ADJUSTING Removable ANTI-TIPPEROptional Anti-Tipper Push Mounting Holes Warranty WarrantyCanada