Invacare Top End T-3 manual Wheelchair Frame Mounting Bracket Hex Screw

FOOTREST PROCEDURE 7

INSTALLING/USING FOOTREST - T-4 ELITE AND T-4 TITANIUM

1.Remove the hex screws from the mounting bracket.

2.Position the upper support tube on the underside of the wheelchair frame.

3.Position the mounting bracket on top of the wheelchair frame.

4.Install the hex screws to secure the mounting bracket to the wheelchair frame.

5.Repeat STEPS 1-4 to attach the upper support tube and mounting bracket to the other side of the wheelchair.

6.Attach the single plate footrest/lower support tube attachment to the upper support tubes.

7.Tighten the set screws.

8.If necessry, adjust footrest. Refer to ADJUSTING FOOTREST in this procedure.

FOOTREST

Wheelchair Frame

Mounting Bracket

Hex Screw

Footplate	Set Screw
Button Scew
	Locknut

Upper Support Tube

Lower Support Tube

Footplate Mounting Bracket

FIGURE 2 - INSTALLING/USING FOOTREST - T-4 ELITE AND T-4

TITANIUM

Part No. 1054916 51 T-3™ and T-4™ Series