MECHANICAL MOUNTING DETAILS
Option 1 - Bolt down onto concrete plinth
-Ensure motor does not protrude into
-Position baseplate (43) with centre of single support stud (45) 105mm from edge of gate (46). (This dimension assumes centre line of rack (47) is 20mm from edge of gate).
-Using the baseplate as a template mark and drill the 4 mounting holes into the concrete for the four M10 x 95 expansion studs.
-Use two M12 plated nuts per expansion stud as spacers below the foundation plate.
-Secure the baseplate to the expansion studs using one M10 washer and nut per expansion stud.
43 | 47 | 46 |
45
105mm
20mm
C
L
6