Replacing HEPA Exhaust Filter
| Exhaust Filter | |
| Filtre | |
| d’évacuation | |
| Filtro de | |
Exhaust | salida | |
| ||
Filter Cover |
| |
Couvercle |
| |
du filtre | Air | |
d’évacuation | ||
Flow | ||
Cubierta de |
| |
flitro de salida |
| |
| Tabs | |
| Languettes | |
| Lengüetas | |
Exhaust |
| |
Filter Seal |
Joint du filtre d'évacuation Sello gris de filtro de salida
Exhaust
Filter
Filtre |
|
d’évacuation | low |
| A |
| ir |
| F |
Filtro |
|
de escape |
|
➢The HEPA exhaust filter removes dirt from recirculated air.
➢Check filter after emptying dust bin. Replace when dirty.
➢To remove, pull out on both sides of the exhaust filter cover.
➢Grasp the exhaust filter and pull out to remove.
➢Ensure foam edge of the filter is facing towards the vacuum cleaner when placing filter into filter compartment. Push only on filter frame.
➢Reinstall exhaust filter cover by snapping into place.
*Filter cannot be cleaned and should be replaced at least once each year.
Cleaning Agitator
➢Ensure
➢Clean agitator after every five uses.
➢Turn vacuum over, exposing the agitator.
➢Cut off any carpet pile and lint entangled around agitator with a pair of scissors.
- 34 -