Removing Clogs
Secondary Filter |
Filtre secondaire |
Malla secundaria |
Dust Bin Port |
Orifice d’entrée |
du bac à |
poussière |
Puerto del |
compartimiento |
del polvo |
If the vacuum cleaner does not seem to have adequate suction, first check if the dust bin is full or if a filter is clogged.
➢Check the hose area.
➢Remove extension hose by grasping the hose collar, twisting, and pulling straight off.
➢Visually inspect the hose and the base area into which the hose is connected.
➢Remove any visible clog.
➢
➢Plug in the vacuum cleaner and turn it on.
➢Stretch the hose to maximum length and then allow the hose to return to its storage length.
➢Turn the unit off and unplug the unit.
➢Remove dust bin and check dust bin port and secondary filter for clogs.
➢If the dust bin and filter areas and the hose areas are free of clogs, check the nozzle area.
➢Return the vacuum cleaner to the upright position before plugging into an electrical outlet.
- 44 -