Marmitek 20211 Installation of the IR Transmitter, Installation of the IR Receiver, See figure

Page 4

3. INSTALLATION OF THE IR TRANSMITTER

See figure 1.

 

1. Insert the supplied power adapter into the power socket

 

(230V-50Hz) and insert the power plug into the DC

 

input [E] at the backside of the IR transmitter. Use strictly

 

the supplied adapter!

 

2. Place the IR transmitter at a maximum distance of 6

 

meters form the A/V equipment (DVD player, decoder,

 

video, stereo, etc.) that you want to operate. Point the

 

front side (with the Marmitek logo) of the IR transmitter

Figure 1

at the A/V equipment.

 

Beware: It is important for the proper function of the system that the antenna wire [G] stays free and does not get covered by the metal cas- ing of e.g. A/V equipment.

4. INSTALLATION OF THE IR RECEIVER

See figure 3 and 4.

1.Open the IR receiver by sliding down the cover at the backside.

2.Place the 2 additionally supplied AAA 1.5V batteries into the IR receiver. Be careful about the polarity (+/-). This is indicated at the inside of the IR receiver. Use strictly non-rechargeable (Alkaline) batteries. Slide the cover back onto the IR receiver.

3.Place the IR receiver within the range of your remote control (maximum 6 meters). Make sure that the front side (with the Marmitek logo) is facing you.

The IR receiver can be moved freely due to the wireless technology. However, it is important to place it within the sight and range of your remote control. Experiment with its position for the best result.

Figure 3

Figure 4

4

© MARMITEK

Image 4
Contents Powermid XS Marmitek SET Contents Safety WarningsIntroduction Installation of the IR Transmitter Installation of the IR ReceiverSee figure SeeFrequently Asked Questions Installation of the Optional IR Extender Cable IR EYEUsage Technical Data IR Transmitter IR ReceiverOptionally Available IR EYE Art. no Extra IR receiver Art. nrMarmitek Sicherheitshinweise EinführungInstallation DES IR Senders IR Transmitter VerpackungsinhaltSiehe Abbildung Dem Marmitek Logo des IR Senders auf Ihre A/V GeräteInstallation DES Optionalen IR Verlängerungskabels IR EYE AnwendungHäufig Gestellte Fragen Technische Daten Optional ErhältlichIR Sender IR Transmitter IR Empfänger IR ReceiverIR EYE Art.-Nr Extra IR Empfänger Art.-NrAvertissements DE Securite Contenu DE L’EMBALLAGEInstallation DU Transmetteur IR Transmitter Installation DU Receveur IR IR ReceiverVoir image Voir images 3 etUtilisation Installation DU Câble DE Rallonge Optionnel IR IR EYEFoire AUX Questions Transmetteur IR IR Transmitter Caractéristiques TechniquesReceveur IR IR Receiver EN Vente Optionnellement IR EYE art.nr Extra IR Récepteur Art nrMarmitek Introducción Avisos DE SeguridadContenido DEL Embalaje Instalacion DEL Transmisor IR IR Transmitter Instalacion DEL Receptor IR IR ReceiverVea Figura Los aparatos A/VInstalacion DEL Cable DE Extension Opcional IR EYE Modo DE EmpleoPreguntas Frecuentes Dados Tecnicos ¿Es posible utilizar varios receptores IR a la vez?¿Es posible utilizar varios transmisores IR a la vez? Transmisor IR IR TransmitterIR EYE no. de art Opcionalmente AsequibleReceptor IR adjunto no. de art Marmitek Introduzione Precauzioni DI SicurezzaContenuto DELL’IMBALLAGGIO Installazione DEL Trasmettitore IR IR Transmitter Installazione DEL Ricevitore IR IR ReceiverVedere la figura Vedere la figura 3 eInstallazione DEL Cavo DI Prolunga IR Opzionale IR EYE Domande FrequentiTrasmettitore IR IR Transmitter Specificazioni TecnicheRicevitore IR IR Receiver IR EYE no. di art Accessori DisponibiliRicevitore IR aggiuntivo Art n Marmitek Introductie VeiligheidswaarschuwingenInhoud VAN DE Verpakking Van de IR zender op uw A/V apparaten Zie afbeeldingZie afbeelding 3 en Gebruik Installatie VAN DE Optionele IR Verlengerkabel IR EYEVeel Gestelde Vragen Technische Gegevens Kunnen meerdere IR ontvangers met elkaar gebruikt worden?Kunnen meerdere IR zenders met elkaar gebruikt worden? IR Zender IR TransmitterIR EYE Art.nr Optioneel VerkrijgbaarExtra IR ontvanger Art nr Declaration of Conformity 0536