Philips 700 manual Attaching the brush head, Charging the Sonicare, Battery charge indicator

English

Attaching the brush head

1Align the brush head so the bristles face the front of the handle.

2 Firmly press the brush head down onto the metal shaft until it stops.

Note:There is a small gap between the colour code ring and the handle.

Charging the Sonicare

1Put the plug of the charger in the wall socket.

2Place the handle on the charger.

,The battery charge indicator next to the battery symbol flashes to

indicate that the toothbrush is charging.

Battery charge indicator

The battery charge indicator shows the approximate remaining battery charge.

Deluxe charge indicator (specific types only):

-Solid green: 50-100%

-Flashing green: 10-49%

-Flashing yellow: less than 10%

Standard charge indicator (specific types only):

-Solid green: 50-100%

-Flashing green: less than 50%

Note:When the battery is low, you hear 3 beeps after the completion of the brushing cycle and the battery charge indicator flashes for 30 seconds.

Note:To keep the battery fully charged, you may keep your Sonicare on the charger when not in use. It takes 24 hours to charge the battery fully.

Using the Sonicare

Brushing instructions

1

2

3

4

5

Wet the bristles and apply a small amount of toothpaste.

Place the toothbrush bristles against the teeth at a slight angle towards the gumline.

Press the on/off button to switch on the Sonicare.

Apply light pressure to maximise Sonicare’s effectiveness and let the Sonicare toothbrush do the brushing for you.

Gently move the brush head slowly across the teeth in a small back and forth motion so the longer bristles reach between your teeth. Continue this motion throughout the brushing cycle.

Note:To make sure you brush evenly throughout the mouth, divide your mouth into 4 sections using the Quadpacer feature (see chapter ‘Features’).