Yamaha PJP-100H owner manual Calling another unit using the address book, Online 192.168.0.20

Page 21

Calling another unit using the address book

Follow the procedure below to call another unit registered in the address book.

y

You can edit and manage the address book with a PC. See “Editing Address Book” (page 33) for details.

1Press in the initial display.

The Address Book display appears.

Address Book

Headquarter

Branch A

Branch B

2 Press or to select the destination unit,

and then press .

The calling display appears.

Address Book

Headquater

^
Branch A
Headquarter
Branch B
[ ]	:Cancel
		[#]

The IP address of this unit and the registered name of the destination unit appear if the call is connected by

pressing on the destination unit and conversation becomes available.

To adjust the speaker volume or disconnect the call, follow steps 4 and 5 in “Calling another unit by specifying an IP address” (page 16).

Making a Call

Calling another unit in online status

Follow the procedure below to call another unit which is online in the same subnet.

Note

The “Online” menu does not show the PJP units that are turned off.

1 Press in the initial display.

The menu screen appears.

Menu

1. Settings

2.Call History

3.Online

2 Press or to select “3. Online”, and then

press .

The “Online” menu appears.

Online

192.168.0.20

BASIC CALL OPERATIONS

English

17

Image 21

Contents IP audio conference system Important Safty Instractions FCC Information for US customers Iii Contents Settings from the PC FeaturesAudio conference through networks Arrayed microphones and speakers for high audio qualitySupplied Accessories About this manualAbout trademarks Top panel Controls and FunctionsDC in 12V terminal Right side panelAudio in terminal Audio OUT terminalSerial label OtherSerial terminal Arrayed speakers Bottom panel192.168.100.200 Menu AddressDisplay To configure the settings from a PC Preparation ProcedureTo use this unit with a SIP server LAN cableConnecting this unit Standby modeTo exit the standby mode and switch this unit on again If the IP address display is ???.???.???.??? Registering the network settings of this unitObtaining the IP address automatically To check if the correct network information is obtainedSettings Network Settings Sound Settings General Settings Menu Settings Call History OnlineNetwork Settings IP Address Subnet Mask Default Gateway IP ???.???.???.??? Menu AddressEnable Disable IP Adress 192.168.100.200Subnet Mask 255.255.255.000 Press or to select 3. Default Gateway Then press Default Gateway 000.000.000.000DNS Server 000.000.000.000 Press or to select 4. DNS Server, Then pressInstalling this unit in the conference room About installation environmentTake the positions of the talkers in consideration Making a Call Menu Address CancelCalling another unit by specifying an IP address 192.168.100.20192.168.0.10 To make a call involving multiple LocationsTo mute the microphone Address Book Headquarter Branch a Branch B Calling another unit using the address bookCalling another unit in online status Online 192.168.0.20Calling another unit using the call history Online 192.168.0.20 CancelCall History Headquarter Branch a Press or to select 2. Call History, Then pressCall History Headquater Branch a CancelAnswering a Call To deny the callWhile having an incoming call, press Carry out the procedure in Answering a Call Carry out one of the following procedure during a callTalking with Multiple Locations To call another location during a callWhen Speaker Mode is other than Divide When Speaker Mode is set to Divide192.168.100.20 192.168.100.30 Menu Address 192.168.100.20 192.168.100.30 192.168.100.40 Menu AddressChange Location 192.168.100.20 192.168.100.30 Menu Address Press during callPress or to select 4. Change location Then press Configuring Settings Configuring settings using the keys on this unitPress or to select the menu category Then press To return to the previous menu without saving the setting Configuring settings using the web menuTo confirm the setting, press Change the parameterSetting Menu List Configuring network settingsManaging address book information Configuring the connection mode Configuring the Dhcp server settingsConfiguring the NAT traversal setting Configuring the SIP server settingSelecting the audio pickup area Microphone mode Configuring sound settingsConfiguring the speaker mode Using the web menuConfiguring the room size Configuring the external input/output SettingConfiguring the audio connection function Configuring general settings Setting the password Restoring the factory settingsStoring the call history Registering a new address Editing Address BookEditing an existing address Deleting an address Registering the SIP server information Using the SIP ServerWeb menu, click SIP Server Click SubmitTokyohq@sales.yama 2006.05 09 48 Menu Address Display in SIP server operationCalling another unit by dialing the user Initial displayWeb menu, click Sntp Server Setting Date and TimeContents of call history file Managing the Call HistoryViewing the call history file Confirming the System Log Message of This Unit syslog Web menu, click Syslog SettingMaximum number of locations by Cascade connection What is cascade connection ?Configure the setting of the cascade server Configure the settings Cascade clientsDisplay in cascade connection Software Licensing Agreement Updating the FirmwareFirmware Update ver. DT1.12-V1.6x Yes 2. No Settings General Settings Restore Settings Firmware UpdateFirmware update process takes a few minutes to complete When the firmware update is completeUpdating the firmware manually Press To cancel the firmware updateQ1 LED indicators do not light up TroubleshootingWeb menu cannot be opened Q2 Web menu setting is not availableCall cannot be originated Q3 Call is impossibleAudio is interrupted Q4 Other problemsRestore Settings Yes 2. No Resetting the UnitResetting using the keys on this unit To cancel resetting in the middleResetting using the web menu Web menu, click Restore Factory SettingsClick Restore Factory Settings Obtaining the audio characteristic information Obtaining the Setting Information for Support on this UnitClick Download Setting Information in the web menu Click SaveSpecifications Page All rights reserved