Talking with Multiple Locations
Display and speaker output during multiple connections
The information display and speaker output method are variable depending on the settings in “Connection Mode” (page 27) and “Speaker Mode” (page 29).
■When “Speaker Mode” is set to “Divide”
IP address of this unit
192.168.0.10 |
192.168.100.20
192.168.100.30 
192.168.100.40
Menu 
:Address
IP address of other units
The audio from each location is output from a different position.
, 
and 
displayed before the IP address of each location indicate the positions of the speakers where the audio from respective locations are output.
Positions in | Positions in |
y
•Also you can change the speaker output positions according to locations, when the connection mode (page 27) is set to “Mesh” and the speaker mode is set to “Divide”. See “Changing the speaker output positions according to locations” (page 23).
•Each time you press 
, you can switch between IP address and setting icon shown at the top of the display. (When using an
SIP server, the display switches between SIP address, setting icon, and IP address.)
■When “Speaker Mode” is other than “Divide”
IP address of this unit
192.168.0.10 |
[1]192.168.100.20
[2]192.168.100.30
[3]192.168.100.40
Menu 
:Address 
IP address of other units
The audio from other locations is not divided according to locations, but are mixed and output as monaural audio. Simply the order of connections is displayed before the IP addresses of other units.
y
See page 36 for the display during a call through the SIP server, and see page 41 for the display in cascade connection.
22