Yamaha PJP-100H Display in cascade connection, Configure the setting of the cascade server

Hierarchical Connection of Multiple PJP Units (Cascade Connection)

Configuring the cascade settings

First configure the setting of cascade server unit, and then configure the settings of the cascade client units.

■Step 1. Configure the setting of the cascade server.

1		Press	in the initial display.
		The menu screen appears.
	2	Press	or	to select “1. Settings”, and
		then press			.
		The “Settings” menu appears.
	3	Press	or	to select “1. Network Settings”,
		and then press			.
		The “Network Settings” menu appears.
	4	Press	or	to select “6. Connection
		Mode”, and then press				.
		The “Connection Mode” menu appears.
	5	Press	or	to select “1. Cascade Server”,

and then press .

The settings are saved.

Return to the initial display and check that is displayed at the top of the display.

Display in cascade connection

The IP addresses of this unit and other units connected to this unit are displayed during call.

IP address of this unit

192.168.0.10

192.168.100.20

192.168.100.30

Menu :Address

IP address of other units

The mark displayed before each IP address indicates the cascade connection mode of each unit.

• : The unit is set to “Cascade Server”.

• : The unit is set to “Cascade Client”.

CONFIGURATIONS

■Step 2. Configure the settings of the

cascade clients

Follow the procedure in “Step 1. Configure the setting of the cascade server.” above and select “2. Cascade Client” in step 5.

After completing the setting, return to the initial display

and check that is displayed at the top of the display.

English

41