Yamaha PJP-100H owner manual Default Gateway 000.000.000.000, DNS Server 000.000.000.000

Page 17

11 Press or to select “3. Default Gateway”,

and then press .

The “Default Gateway” menu appears.

Default Gateway

000.000.000.000

(000.000.000.000)

[] [#]

12Use the numeric keys to enter the “Default

Gateway” of this unit, and then press .

The entered “Default Gateway” is registered and the “Network Settings” menu reappears.

Preparation Procedure

14Use the numeric keys to enter the IP address of the DNS server referenced by this unit,

and then press .

The entered DNS server IP address is registered and the “Network Settings” menu reappears.

Network Settings

1. IP Address

2.Subnet Mask

3.Default Gateway

PREPARATION

Network Settings

1. IP Address

2.Subnet Mask

3.Default Gateway

13 Press or to select “4. DNS Server”, and

then press .

The “DNS Server” menu appears.

DNS Server

000.000.000.000

(000.000.000.000)

[] [#]

English

Image 17

Contents IP audio conference system Important Safty Instractions FCC Information for US customers Iii Contents Settings from the PC FeaturesAudio conference through networks Arrayed microphones and speakers for high audio qualityAbout trademarks Supplied AccessoriesAbout this manual Top panel Controls and FunctionsDC in 12V terminal Right side panelAudio in terminal Audio OUT terminalSerial label OtherSerial terminal Arrayed speakers Bottom panelDisplay 192.168.100.200Menu Address To configure the settings from a PC Preparation ProcedureTo use this unit with a SIP server LAN cableTo exit the standby mode and switch this unit on again Connecting this unitStandby mode If the IP address display is ???.???.???.??? Registering the network settings of this unitObtaining the IP address automatically To check if the correct network information is obtainedSettings Network Settings Sound Settings General Settings Menu Settings Call History OnlineNetwork Settings IP Address Subnet Mask Default Gateway IP ???.???.???.??? Menu AddressSubnet Mask 255.255.255.000 Enable DisableIP Adress 192.168.100.200 Press or to select 3. Default Gateway Then press Default Gateway 000.000.000.000DNS Server 000.000.000.000 Press or to select 4. DNS Server, Then pressTake the positions of the talkers in consideration Installing this unit in the conference roomAbout installation environment Making a Call Menu Address CancelCalling another unit by specifying an IP address 192.168.100.20To mute the microphone 192.168.0.10To make a call involving multiple Locations Address Book Headquarter Branch a Branch B Calling another unit using the address bookCalling another unit in online status Online 192.168.0.20Calling another unit using the call history Online 192.168.0.20 CancelCall History Headquarter Branch a Press or to select 2. Call History, Then pressCall History Headquater Branch a CancelWhile having an incoming call, press Answering a CallTo deny the call Carry out the procedure in Answering a Call Carry out one of the following procedure during a callTalking with Multiple Locations To call another location during a callWhen Speaker Mode is other than Divide When Speaker Mode is set to Divide192.168.100.20 192.168.100.30 Menu Address 192.168.100.20 192.168.100.30 192.168.100.40 Menu AddressPress or to select 4. Change location Then press Change Location 192.168.100.20 192.168.100.30 Menu AddressPress during call Press or to select the menu category Then press Configuring SettingsConfiguring settings using the keys on this unit To return to the previous menu without saving the setting Configuring settings using the web menuTo confirm the setting, press Change the parameterManaging address book information Setting Menu ListConfiguring network settings Configuring the connection mode Configuring the Dhcp server settingsConfiguring the NAT traversal setting Configuring the SIP server settingSelecting the audio pickup area Microphone mode Configuring sound settingsConfiguring the speaker mode Using the web menuConfiguring the audio connection function Configuring the room sizeConfiguring the external input/output Setting Configuring general settings Storing the call history Setting the passwordRestoring the factory settings Registering a new address Editing Address BookEditing an existing address Deleting an address Registering the SIP server information Using the SIP ServerWeb menu, click SIP Server Click SubmitTokyohq@sales.yama 2006.05 09 48 Menu Address Display in SIP server operationCalling another unit by dialing the user Initial displayWeb menu, click Sntp Server Setting Date and TimeViewing the call history file Contents of call history fileManaging the Call History Confirming the System Log Message of This Unit syslog Web menu, click Syslog SettingMaximum number of locations by Cascade connection What is cascade connection ?Display in cascade connection Configure the setting of the cascade serverConfigure the settings Cascade clients Software Licensing Agreement Updating the FirmwareFirmware Update ver. DT1.12-V1.6x Yes 2. No Settings General Settings Restore Settings Firmware UpdateFirmware update process takes a few minutes to complete When the firmware update is completeUpdating the firmware manually Press To cancel the firmware updateQ1 LED indicators do not light up TroubleshootingWeb menu cannot be opened Q2 Web menu setting is not availableCall cannot be originated Q3 Call is impossibleAudio is interrupted Q4 Other problemsRestore Settings Yes 2. No Resetting the UnitResetting using the keys on this unit To cancel resetting in the middleClick Restore Factory Settings Resetting using the web menuWeb menu, click Restore Factory Settings Obtaining the audio characteristic information Obtaining the Setting Information for Support on this UnitClick Download Setting Information in the web menu Click SaveSpecifications Page All rights reserved