Yamaha PJP-100H Enable Disable, IP Adress 192.168.100.200, Subnet Mask 255.255.255.000

Page 16

Preparation Procedure

5 Press

or to select “5. DHCP”, and then

press

.

The “DHCP” menu appears.

DHCP

1. Enable

2. Disable

6 Press or to select “2. Disable”, and then

press .

The “Network Settings” menu reappears.

Network Settings

1. IP Address

2.Subnet Mask

3.Default Gateway

7 Press or to select “1. IP Address”, and

then press .

The “IP Address” menu appears.

IP Adress

192.168.100.200

^

(192.168.100.200)

[] [#]

8Use the numeric keys to enter the IP address

of this unit, and then press .

The entered IP address is registered and the “Network Settings” menu reappears.

Network Settings

1. IP Address

2.Subnet Mask

3.Default Gateway

9 Press or to select “2. Subnet Mask”, and

then press .

The “Subnet Mask” menu appears.

Subnet Mask

255.255.255.000

^

(255.255.255.000)

[] [#]

10Use the numeric keys to enter the subnet

mask of this unit, and then press .

The entered subnet mask is registered and the “Network Settings” menu reappears.

Network Settings

1. IP Address

2.Subnet Mask

3.Default Gateway

12

Image 16
Contents IP audio conference system Important Safty Instractions FCC Information for US customers Iii Contents Features Settings from the PCAudio conference through networks Arrayed microphones and speakers for high audio qualityAbout this manual Supplied AccessoriesAbout trademarks Controls and Functions Top panelRight side panel DC in 12V terminalAudio in terminal Audio OUT terminalOther Serial labelSerial terminal Arrayed speakers Bottom panelMenu Address 192.168.100.200Display Preparation Procedure To configure the settings from a PCTo use this unit with a SIP server LAN cableStandby mode Connecting this unitTo exit the standby mode and switch this unit on again Registering the network settings of this unit If the IP address display is ???.???.???.???Obtaining the IP address automatically To check if the correct network information is obtainedMenu Settings Call History Online Settings Network Settings Sound Settings General SettingsNetwork Settings IP Address Subnet Mask Default Gateway IP ???.???.???.??? Menu AddressIP Adress 192.168.100.200 Enable DisableSubnet Mask 255.255.255.000 Default Gateway 000.000.000.000 Press or to select 3. Default Gateway Then pressDNS Server 000.000.000.000 Press or to select 4. DNS Server, Then pressAbout installation environment Installing this unit in the conference roomTake the positions of the talkers in consideration Menu Address Cancel Making a CallCalling another unit by specifying an IP address 192.168.100.20To make a call involving multiple Locations 192.168.0.10To mute the microphone Calling another unit using the address book Address Book Headquarter Branch a Branch BCalling another unit in online status Online 192.168.0.20Online 192.168.0.20 Cancel Calling another unit using the call historyCall History Headquarter Branch a Press or to select 2. Call History, Then pressBranch a Cancel Call History HeadquaterTo deny the call Answering a CallWhile having an incoming call, press Carry out one of the following procedure during a call Carry out the procedure in Answering a CallTalking with Multiple Locations To call another location during a callWhen Speaker Mode is set to Divide When Speaker Mode is other than Divide192.168.100.20 192.168.100.30 Menu Address 192.168.100.20 192.168.100.30 192.168.100.40 Menu AddressPress during call Change Location 192.168.100.20 192.168.100.30 Menu AddressPress or to select 4. Change location Then press Configuring settings using the keys on this unit Configuring SettingsPress or to select the menu category Then press Configuring settings using the web menu To return to the previous menu without saving the settingTo confirm the setting, press Change the parameterConfiguring network settings Setting Menu ListManaging address book information Configuring the Dhcp server settings Configuring the connection modeConfiguring the NAT traversal setting Configuring the SIP server settingConfiguring sound settings Selecting the audio pickup area Microphone modeUsing the web menu Configuring the speaker modeConfiguring the external input/output Setting Configuring the room sizeConfiguring the audio connection function Configuring general settings Restoring the factory settings Setting the passwordStoring the call history Editing Address Book Registering a new addressEditing an existing address Deleting an address Using the SIP Server Registering the SIP server informationWeb menu, click SIP Server Click SubmitDisplay in SIP server operation Tokyohq@sales.yama 2006.05 09 48 Menu AddressCalling another unit by dialing the user Initial displaySetting Date and Time Web menu, click Sntp ServerManaging the Call History Contents of call history fileViewing the call history file Web menu, click Syslog Setting Confirming the System Log Message of This Unit syslogWhat is cascade connection ? Maximum number of locations by Cascade connectionConfigure the settings Cascade clients Configure the setting of the cascade serverDisplay in cascade connection Updating the Firmware Software Licensing AgreementSettings General Settings Restore Settings Firmware Update Firmware Update ver. DT1.12-V1.6x Yes 2. NoFirmware update process takes a few minutes to complete When the firmware update is completeUpdating the firmware manually To cancel the firmware update PressTroubleshooting Q1 LED indicators do not light upQ2 Web menu setting is not available Web menu cannot be openedQ3 Call is impossible Call cannot be originatedQ4 Other problems Audio is interruptedResetting the Unit Restore Settings Yes 2. NoResetting using the keys on this unit To cancel resetting in the middleWeb menu, click Restore Factory Settings Resetting using the web menuClick Restore Factory Settings Obtaining the Setting Information for Support on this Unit Obtaining the audio characteristic informationClick Download Setting Information in the web menu Click SaveSpecifications Page All rights reserved