Yamaha PJP-100H Talking with Multiple Locations, To call another location during a call

Talking with Multiple Locations

This unit is designed to enable a conference call between up to 4 locations (with the mesh connection). It is also possible to call a new location (branch office or department) during a call. To establish a call involving multiple locations, first connect a call with one of the locations and then call other locations one after another.

Call another location during a call

Connecting

Headquarter Branch A

Make a call

Branch B

Connecting more than two locations

■To call another location during a call

Carry out one of the following procedure during a call.

–Calling another unit by specifying an IP address (page 15)

–Calling another unit using the address book (page 17)

–Calling another unit in online status (page 17)

–Calling another unit using the call history (page 18)

The new location is added to the ongoing conference.

■To answer a call during a call

Carry out the procedure in “Answering a Call” (page 20).

The new location is added to the ongoing conference.

BASIC OPERATIONS

Connecting

Headquarter Branch A

Connecting Connecting

Branch B

Note

The mesh connection is available only when “G.711 Extension” or “G.711 µ-law” is selected as the codec. See “Configuring the codec” (page 31) and “Specifications” (page 53) for details about the codec.

y

Conference call between multiple locations is also possible by assigning each of the PJP units to be involved in connection as either server or client, and establishing a call between the servers that are connected to the clients. See “Hierarchical Connection of Multiple PJP Units (Cascade Connection)” (page 40) for details.

CALL

English

21