Yamaha PJP-100H Configuring sound settings, Selecting the audio pickup area Microphone mode

Page 32

Setting Menu List

Configuring sound settings

Selecting the audio pickup area

(microphone mode)

You can select the audio pickup area of the microphone during call. The default setting is “Zone”.

Zone: Pick up the audio in large area not only tracking the audio of the talker. It is suitable for the relatively quiet environment. To specify audio pickup area, use the numeric keys in “Microphone Mode” menu. According to the pressed keys, the audio in the area of the following figure is picked up or not.

Microphone indicators (blue LED) of which direction audio can be picked up from all light up. This mode

indicated by on the display.

y

You can select multiple areas at the same time. The selectable area’s sets are [1+7], [2+8], [3+9], or all areas.

Track: The microphone system automatically tracks and focuses the audio of the talker not fixing the audio pickup area (only the one talker’s audio can be picked up at the same time). The audio can be picked up with narrow directivity so that the noises other than the taker can be lessened. It is suitable to pick up the audio clearly in the environment where there are noises.

123

789

Microphone indicators (blue LED) of which direction audio can be picked up from all light up. This mode

indicated by on the display.

y

Press 5 to pick up audio from all directions.

You can select multiple areas at the same time. The selectable area’s sets are [1+2+7+8], [2+3+8+9], or all areas.

Spot: Fix the audio pickup area to the two positions facing the unit with the narrow directivity of the speaker. It is suitable for the cases that the taker is fixed one or two persons, or there is equipment produces noise such as the projector. To specify audio pickup area, use the numeric keys in “Microphone Mode” menu. According to the pressed keys, audio in the areas of the following figure is picked up or not.

Today...

Within 2 m

Within 2 m

Tracking the talker’s direction automatically

Within 2 m

 

 

 

 

Within 2 m

Next...

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

7

8

9

Within 2 m

Within 2 m

28

Image 32
Contents IP audio conference system Important Safty Instractions FCC Information for US customers Iii Contents Features Settings from the PCAudio conference through networks Arrayed microphones and speakers for high audio qualityAbout trademarks Supplied AccessoriesAbout this manual Controls and Functions Top panelRight side panel DC in 12V terminalAudio in terminal Audio OUT terminalOther Serial labelSerial terminal Arrayed speakers Bottom panelDisplay 192.168.100.200Menu Address Preparation Procedure To configure the settings from a PCTo use this unit with a SIP server LAN cableTo exit the standby mode and switch this unit on again Connecting this unitStandby mode Registering the network settings of this unit If the IP address display is ???.???.???.???Obtaining the IP address automatically To check if the correct network information is obtainedMenu Settings Call History Online Settings Network Settings Sound Settings General SettingsNetwork Settings IP Address Subnet Mask Default Gateway IP ???.???.???.??? Menu AddressSubnet Mask 255.255.255.000 Enable DisableIP Adress 192.168.100.200 Default Gateway 000.000.000.000 Press or to select 3. Default Gateway Then pressDNS Server 000.000.000.000 Press or to select 4. DNS Server, Then pressTake the positions of the talkers in consideration Installing this unit in the conference roomAbout installation environment Menu Address Cancel Making a CallCalling another unit by specifying an IP address 192.168.100.20To mute the microphone 192.168.0.10To make a call involving multiple Locations Calling another unit using the address book Address Book Headquarter Branch a Branch BCalling another unit in online status Online 192.168.0.20Online 192.168.0.20 Cancel Calling another unit using the call historyCall History Headquarter Branch a Press or to select 2. Call History, Then pressBranch a Cancel Call History HeadquaterWhile having an incoming call, press Answering a CallTo deny the call Carry out one of the following procedure during a call Carry out the procedure in Answering a CallTalking with Multiple Locations To call another location during a callWhen Speaker Mode is set to Divide When Speaker Mode is other than Divide192.168.100.20 192.168.100.30 Menu Address 192.168.100.20 192.168.100.30 192.168.100.40 Menu AddressPress or to select 4. Change location Then press Change Location 192.168.100.20 192.168.100.30 Menu AddressPress during call Press or to select the menu category Then press Configuring SettingsConfiguring settings using the keys on this unit Configuring settings using the web menu To return to the previous menu without saving the settingTo confirm the setting, press Change the parameterManaging address book information Setting Menu ListConfiguring network settings Configuring the Dhcp server settings Configuring the connection modeConfiguring the NAT traversal setting Configuring the SIP server settingConfiguring sound settings Selecting the audio pickup area Microphone modeUsing the web menu Configuring the speaker modeConfiguring the audio connection function Configuring the room sizeConfiguring the external input/output Setting Configuring general settings Storing the call history Setting the passwordRestoring the factory settings Editing Address Book Registering a new addressEditing an existing address Deleting an address Using the SIP Server Registering the SIP server informationWeb menu, click SIP Server Click SubmitDisplay in SIP server operation Tokyohq@sales.yama 2006.05 09 48 Menu AddressCalling another unit by dialing the user Initial displaySetting Date and Time Web menu, click Sntp ServerViewing the call history file Contents of call history fileManaging the Call History Web menu, click Syslog Setting Confirming the System Log Message of This Unit syslogWhat is cascade connection ? Maximum number of locations by Cascade connectionDisplay in cascade connection Configure the setting of the cascade serverConfigure the settings Cascade clients Updating the Firmware Software Licensing AgreementSettings General Settings Restore Settings Firmware Update Firmware Update ver. DT1.12-V1.6x Yes 2. NoFirmware update process takes a few minutes to complete When the firmware update is completeUpdating the firmware manually To cancel the firmware update PressTroubleshooting Q1 LED indicators do not light upQ2 Web menu setting is not available Web menu cannot be openedQ3 Call is impossible Call cannot be originatedQ4 Other problems Audio is interruptedResetting the Unit Restore Settings Yes 2. NoResetting using the keys on this unit To cancel resetting in the middleClick Restore Factory Settings Resetting using the web menuWeb menu, click Restore Factory Settings Obtaining the Setting Information for Support on this Unit Obtaining the audio characteristic informationClick Download Setting Information in the web menu Click SaveSpecifications Page All rights reserved