Making a Call
3 Press 
or to select the destination unit,
and then press 
. The calling display appears.
Online
192.168.0.20
192.168.0.20
:Cancel
The IP addresses of this unit and destination unit
appear if the call is connected by pressing 
on the destination unit and conversation becomes available. To adjust the speaker volume or disconnect the call, follow steps 4 and 5 in “Calling another unit by specifying an IP address” (page 16).
y
If a unit available for communication is already registered in the address book, the name registered for the unit is displayed instead of the IP address.
Calling another unit using the call history
Follow the procedure below to call another unit by referring to the history of past outgoing or incoming calls.
Note
If the destination PJP unit obtains the IP address from the DHCP server, its IP address may be changed from the last call. If your call cannot reach the destination unit, check the latest IP address configured at the destination unit.
1 Press in the initial display.
The menu screen appears.
Menu
1. Settings
2.Call History
3.Online
2 Press 
or to select “2. Call History”, and
then press 
.
The “Call History” menu appears.
Call History
Headquarter
Headquarter
Branch A
18