Plantronics T10 warranty Diagram KEY, Important Safety Information, Base Front Base Rear, Headset

UK

DIAGRAM KEY

BASE FRONT		BASE REAR
1	Headset Stand	16	Telephone Line Jack
2	On Line Indicator Light	17	Line Cable

3Twelve Button Dial Pad

4	Flash Timing Switch	HEADSET
5	Headset Select Switch	18	Headset Cable
6	Ringer Volume Control	19	Clothing Clip
7	Flash Button	20	Adjustable Headband
8	Mute Indicator Light	21	Headset Assembly
9	Mute Button	22	Microphone Boom
10	Headset Socket	23	Ear Loops (3 Sizes)
11	Headset Button	24	Pivot Ball Ring
12	In-Use Indicator Light	25	Ear Cushion Assembly

13Listen Volume Control

14Redial Button

15Tone Control

IMPORTANT SAFETY INFORMATION

PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE USE:

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the product. The symbol identifies and alerts the user to the presence of important operating and service instructions.

3.Unplug this product from the telephone socket before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4.Do not locate base unit near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.

7

	UK
5. Do not place this product on an unstable cart, stand or table. The product may fall,	UK
causing serious damage to the product.
6. Slots and openings in the base unit and the bottom or back are provided for
ventilation, to protect it from overheating; these openings must not be blocked or
covered. The openings should never be blocked by placing the product in the bed,	D
sofa, rug or other similar surface. This product should never be placed near or
over a radiator or heat register. This product should not be placed in a built-in
installation unless proper ventilation is provided.	DK
7. This product should be operated only from the low voltage power provided
in your telephone line. No separate power supply is required.
8. Do not allow anything to rest on the telephone connection cord.
Do not locate this product where the cord will be abused by persons walking on it.	E
9. Do not overload telephone sockets as this can result in the risk of fire
or electric shock.
10.Never push objects of any kind into this product through base unit slots as they	F
may touch dangerous voltage points or short out parts that could result in a risk
of fire or electric shock. Never spill liquid of any kind on the product.
11.To reduce the risk of electric shock, do not disassemble this product, but take it to
qualified service personnel when service or repair work is required. Opening or	I
removing covers may expose you to dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when the product is subsequently used.
12.Avoid using telephone equipment during an electrical storm. There may be	N
a remote risk of electric shock from lightning.
13.Do not use the telephone equipment to report a gas leak in the vicinity of the leak.
14. Unplug this product from the wall outlet and refer servicing to qualified	NL
service personnel under the following conditions:
a) When the power supply cord or plug is damaged or frayed.
b) If liquid has been spilled into the product.
c) If the product has been exposed to rain or water.	P
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions because
improper adjustments of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to	SF
normal operation.
e) If the product has been dropped or the base unit has been damaged.
f) If the product exhibits a distinct change in performance.
	S
	8