Sipura Technology SPA-2000 manual SPA Web Interface, Web Interface Conventions

Note: If the Administrator password is not set, the items marked with “Requires Password” will not require a password.

3.3.SPA Web Interface

The SPA provides a built-in web server. Convenient configuration and administration can be performed through an integral web interface.

3.3.1. Web Interface Conventions

The SPA uses the following conventions with the web administration capabilities:

oThe SPA-2000 web administration supports two privilege levels: Administrator and User. To use the User privilege, simply point a web browser at the IP address of the SPA-2000; to use the administrator privilege, use URL http://IP_Address_Of_SPA/admin/. See 3.3.2 for more information about administration privileges.

oVersion 1.0 of the SPA supports Internet Explorer 5.5 and above and Netscape 7.0 and above.

oThe web configuration pages can be password protected. See 3.3.2 for more information about password protect.

o The user name of web Administrator is : admin

o The user name of web User is : user

o Note: The user names for both administrator and User are fixed and cannot be changed.

oAfter making changes to SPA-2000 configuration parameters, pressing “Submit All Changes” button will apply all the changes and if necessary, automatically reboot the device. Multiple changes may be made on multiple page tabs of the web interface at the same time. Pressing “Submit All Changes” will apply all the modifications.

Important Note: switching between page tabs won’t apply the changes to SPA-2000, The only way to apply the changes is to press the “Submit All Changes” button.

oIf the “Undo All Changes” button is clicked, any modifications to profile parameters on any and all pages will be reset back to their original values before modification.

NOTE: Pressing the “Undo All Changes” has no effect on the SPA-2000; it will only reset the values on the web page.

3.3.2. Administration Privileges

The SPA-2000 supports two levels of administration privileges: Administrator and User, both privileges can be password protected.

Important note: by factory default, there are no passwords assigned for both Administrator and User.

The Administrator has the privilege to modify all web profile parameters and can also modify the passwords of both Administrator and User. A User only has the privilege to access part of the web