Sipura Technology SPA-2000 101, 110, 111, 120, 121, 130, 131, 140, 150, 7932, Requires Password

Enable/Disable DHCP	101		Enter 1 to enable
			Enter 0 to disable
Check IP Address	110		None	IVR will announce the
				current IP address of SPA.
Set Static IP Address	111		Enter IP address	DHCP must be “Disabled”
			using numbers on	otherwise you will hear,
			the telephone key	“Invalid Option,” if you try
			pad. Use the *	to set this value.
			(star) key when
			entering a decimal
			point.
Check Network Mask	120		None	IVR will announce the
				current network mask of
				SPA.
Set Network Mask	121		Enter value using	DHCP must be “Disabled”
			numbers on the	otherwise you will hear,
			telephone key pad.	“Invalid Option,” if you try
			Use the * (star) key	to set this value.
			when entering a
			decimal point.
Check Static Gateway IP	130		None	IVR will announce the
Address				current gateway IP
				address of SPA.
Set Static Gateway IP	131		Enter IP address	DHCP must be “Disabled”
Address			using numbers on	otherwise you will hear,
			the telephone key	“Invalid Option,” if you try
			pad. Use the *	to set this value.
			(star) key when
			entering a decimal
			point.
Check MAC Address	140		None	IVR will announce the
				MAC address of SPA in
				hex string format.
Check Firmware Version	150		None	IVR will announce the
				version of the firmware
				running on the SPA.
Enable/Disable Web	7932		Enter 1 to enable	Requires Password
Server of SPA			Enter 0 to disable
Manual Reboot of Unit	732668		None	After you hear “Option
				Successful,” hang-up. Unit
				will reboot automatically.
Factory Reset of Unit	73738		Enter 1 to confirm	SPA will prompt for
			Enter * (start) to	confirmation. After
WARNING:			cancel operation	confirming, you will hear
				“Option Successful.” Hang-
© 2003 Sipura Technology, Inc		Proprietary (See Copyright Notice on Page 2)			9