Sipura Technology SPA-2000 manual Calling Line Identification Presentation Clip

	the caller’s name and/or number.
Expected Call and Network Behavior	In between ringing bursts, the SPA can
	generate a Caller-ID signal to the attached
	phone when the phone is on-hook.
	As part of the INVITE message, the SPA sends
	the caller’s name and number as it is
	configured in the profile.
User Action Required to Deactivate or End	No user action required. See CLIP and CLIR.

4.2.2. Calling Line Identification Presentation (CLIP)

Service Description	Some users will elect to block their Caller ID
	information for all outgoing calls. However,
	there may be circumstances where sending
	Caller ID information for a call is desired, i.e.
	trying to reach a party that does not accept
	Caller ID blocked calls.
User Action Required to Activate or Use	Lift the receiver
	Listen for dial tone
	Press *82
	Listen for dial tone
	Dial the telephone number you are calling
Expected Call and Network Behavior	Caller ID will be sent to the distant party for this
	call only. Users must repeat this process at the
	start of each call.
User Action Required to Deactivate or End	No action required. This service is only in
	effect for the duration of the current call.

4.2.3. Calling Line Identification Restriction (CLIR) – Caller ID Blocking

Service Description		This feature allows the user to block the
		delivery of their Caller ID to the number they
		are calling.
User Action Required to Activate or Use		To block Caller ID on the next outbound
		call, do the following:
		Lift the receiver
		Listen for dial tone
		Press *81
		Listen for dial tone
© 2003 Sipura Technology, Inc	Proprietary (See Copyright Notice on Page 2)		35