Sipura Technology SPA-2000 manual User 1 and User 2 Parameters

3.4.5.4.Dial Plan

Default Dial Plan script for each line: “(*xx[3469]11000[2-9]xxxxxx1xxx[2-9]xxxxxxxxxxxxxxxxxx.)” Explanation of Default Dial Plan:

Note: If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where ‘@’, ‘.’, and ‘:’ are dialed by entering “*”, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and 255, and port must be larger than 255. If port is not given, 5060 is used. Port and User-Id are optional. If the user-id portion matches a pattern in the dial plan, then it is interpreted as a regular phone number according to the dial plan. The INVITE message, however, is still sent to the outbound proxy if it is enabled.

3.4.5.5.Polarity Settings

3.4.6. User 1 and User 2 Parameters

User 1/2 refers to the subscriber of Line 1/2. When a call is made from Line 1/2, SPA shall use the user and line settings for that Line; there is no user login support in SPA v1.0. Per user parameter tags must be appended with [1] or [2] (corresponding to line 1 or 2) in the configuration profile. It is omitted below for readability.

3.4.6.1.Call Forward And Selective Call Forward/Blocking Settings