3.4.Configuration Parameters
3.4.1. System Parameters
System Configuration
Parameter Name | Description | Default |
Admin Password | The password for administrator |
|
User Password | The password for User |
|
Enable Web Server | Enable/disable web server of SPA | Yes |
| This feature should only be used on firmware version 1.0.9 or later. |
|
Network Configuration
Parameter Name | Description | Default |
DHCP | Enable/Disable DHCP | Yes |
Host Name | Host Name of SPA |
|
Domain Name | The network domain of SPA |
|
Static IP | Static IP address of SPA, which will take effect if DHCP is | 0.0.0.0 |
| disabled |
|
NetMask | The NetMask used by SPA when DHCP is disabled | 255.255.255. |
|
| 0 |
Gateway | The default gateway used by SPA when DHCP is disabled | 0.0.0.0 |
Primary DNS | DNS server used by SPA in addition to DHCP supplied DNS | 0.0.0.0 |
| servers if DHCP is enabled; when DHCP is disabled, this will |
|
| be the primary DNS server. |
|
Secondary DNS | DNS server used by SPA in addition to DHCP supplied DNS | 0.0.0.0 |
| servers if DHCP is enabled; when DHCP is disabled, this will |
|
| be the secondary DNS server. |
|
DNS Query Mode | Do parallel or sequential DNS Query | Parallel |
Syslog Server | Specify the syslog server name and port. This feature |
|
| specifies the server for logging SPA system information and |
|
| critical events. |
|
Debug Server | The debug server name and port. This feature specifies the |
|
| server for logging SPA debug information. The level of |
|
| detailed output depends on the debug level parameter |
|
| setting. |
|
Debug Level | The higher the debug level, the more debug information will | 0 |
| be generated. Zero (0) means no debug information will be |
|
| generated. |
|
Notes:
-Parallel DNS query mode:
-To log SIP messages, Debug Level must be set to at least 2.
-If both Debug Server and Syslog Server are specified, syslog messages are also logged to the Debug Server.
3.4.2. Provisioning Parameters
Provisioning operations are gated by the Provision_Enable parameter.
Parameter Name | Description |
| Default |
|
Provision Enable | Master enable for configuration profile resync operations | Yes |
| |
|
|
|
|
|
© 2003 Sipura Technology, Inc | Proprietary (See Copyright Notice on Page 2) | 19 |
| |