SIP Accept Language |
| |
| If empty, the header is not included. |
|
Remove Last Reg | Remove last registration before registering a new one if value is | no |
| different one. |
|
SIP T1 | RFC 3261 T1 value (RTT Estimate). Range: 0 – 64 sec | .5 |
SIP T2 | RFC 3261 T2 value (Maximum retransmit interval for | 4 |
| requests and INVITE responses). Range: 0 – 64 sec |
|
SIP T4 | RFC 3261 T4 value (Maximum duration a message will remain in | 5 |
| the network). Range: 0 – 64 sec |
|
SIP Timer B | INVITE time out value. Range: 0 – 64 sec | 32 |
SIP Timer F | 32 | |
SIP Timer H | INVITE final response time out value. Range: 0 – 64 sec | 32 |
SIP Timer D | ACK hang around time. Range: 0 – 64 sec | 32 |
SIP Timer J | 32 | |
INVITE Expires | INVITE request Expires header value in sec. 0 = do not include | 180 |
| Expires header in INVITE. Range: 0 – (231 – 1) |
|
ReINVITE Expires | ReINVITE request Expires header value in sec. 0 = do not | 30 |
| include Expires header in the request. Range: 0 – (231 – 1) |
|
Reg Min Expires | Minimum registration expiration time allowed from the proxy in | 1 |
| the Expires header or as a Contact header parameter. If proxy |
|
| returns something less this value, then the minimum value is |
|
| used. |
|
Reg Max Expires | Maximum registration expiration time allowed from the proxy in | 7200 |
| the |
|
| maximum value is used |
|
Reg Retry Intvl | Interval to wait before the SPA retries registration again after | 30 |
| encountering a failure condition during last registration |
|
SIT1 RSC1 | SIP response status code to INVITE on which to play the SIT1 |
|
| Tone |
|
SIT2 RSC1 | SIP response status code to INVITE on which to play the SIT2 |
|
| Tone |
|
SIT3 RSC1 | SIP response status code to INVITE on which to play the SIT3 |
|
| Tone |
|
SIT4 RSC1 | SIP response status code to INVITE on which to play the SIT4 |
|
| Tone |
|
Try Backup RSC | SIP response status code on which to retry a backup server for |
|
| the current request |
|
Retry Reg RSC | Interval to wait before the SPA retries registration again after | 30 |
| encountering a failure condition during last registration |
|
RTP Port Min2 | Minimum port number for RTP transmission and reception | 16384 |
RTP Port Max2 | Maximum port number for RTP transmission and reception | 16482 |
RTP Packet Size | Packet size in sec. Valid values must be multiple of 0.01s. | 0.02 |
| Range: 0.01 – 0.16 |
|
Notes:
1.Reorder or Busy Tone will be played by default for all unsuccessful response status code
2.<RTP Port Min> and <RTP Port Max> should define a range that contains at least 4 even number ports, such as 100 – 106
3.4.4.1.Dynamic Payload Types
Parameter Name | Description | Default |
|
|
|
|
|
© 2003 Sipura Technology, Inc | Proprietary (See Copyright Notice on Page 2) | 21 | |