Sipura Technology SPA-2000 manual Upgrade Parameters, Protocol Parameters

Page 20

Resync On Reset

Resyncs configuration profile from configuration server

Yes

 

whenever the SPA-2000 resets.

 

Resync Random

Spread interval for resync requests

2

Delay

 

 

Resync Periodic

Resyncs configuration profile periodically after reset.

3600

Resync Error

Retry interval following resync failure

3600

Retry Delay

 

 

Resync From SIP

Enables resync of configuration profile from a SIP command.

Yes

Profile Rule

Configuration profile URL script.

/spa.cfg

Log Resync

Syslog message generated when attempting a resync

 

Request Msg

 

 

Log Resync

Syslog message generated after a successful resync

 

Success Msg

 

 

Log Resync

Syslog message generated after a failed resync

 

Failure Msg

 

 

GPP A

General purpose parameter

empty

GPP B

General purpose parameter

empty

GPP C

General purpose parameter

empty

GPP D

General purpose parameter

empty

Note: In a customized SPA-2000, the profile rule would point to a service provider’s server.

3.4.3. Upgrade Parameters

Parameter Name

Description

Default

Upgrade Enable

Master enable for firmware upgrade operations

Yes

Upgrade Error

Retry interval following upgrade failure

3600

Retry Delay

 

 

Upgrade Rule

Upgrade script.

empty

Log Upgrade

Syslog message generated when attempting an upgrade

 

Request Msg

 

 

Log Upgrade

Syslog message generated after a successful upgrade

 

Success Msg

 

 

Log Upgrade

Syslog message generated after a failed upgrade

 

Failure Msg

 

 

Note: In a customized SPA-2000, the upgrade rule would point to a service provider’s server.

3.4.4.Protocol Parameters

Parameter Name

Description

 

Default

 

 

Max Forward

SIP Max-Forward value. Range: 1 – 255

70

 

 

Max Redirection

Number of times to allow an INVITE to be redirected by a 3xx

5

 

 

 

response to avoid an infinite loop.

 

 

 

 

Note: This parameter currently has no effect: there is no limit on number of

 

 

 

 

redirection.

 

 

 

 

Max Auth

Maximum number of times a request may be challenged (0-255)

2

 

 

SIP User Agent

User-Agent Header to be used by the unit in outbound requests.

Sipura/

 

 

Name

If empty, the header is not included.

$version

 

 

SIP Server Name

Server Header to used by the unit in responses to inbound

Sipura/

 

 

 

responses. If empty, the header is not included.

$version

 

 

 

 

 

 

 

 

© 2003 Sipura Technology, Inc

Proprietary (See Copyright Notice on Page 2)

20

 

 

Image 20 Contents
Sipura Technology, Inc DecemberDisclaimer Please Read Use of Proprietary Information and Copyright NoticeTable of Contents Sipura Technology, Inc SPA-2000 User GuideProduct Description SPA-2000 Hardware OverviewStatus Description Default Handset Blink Behavior RateStatus LED Description Installation Overview Software ConfigurationFirmware Upgrade Firmware Upgrade via TftpIVR Conventions Firmware Upgrade via PC Utility ProgramIVR Interface SPA-2000 Interactive Voice Response IVR Menu ExampleIVR Action IVR Menu Choice Parameters 100Requires Password 101110 111Web Interface Conventions Administration PrivilegesSPA Web Interface Basic and Advanced Views SPA-2000 Web Page Configuration Default Values SPA-2000 Information Web Page Advanced Admin ViewSPA-2000 System Configuration Web Page Advanced Admin View SPA-2000 SIP Configuration Web Page Advanced Admin View Sipura Technology, Inc Proprietary See Copyright Notice on SPA-2000 Regional Configuration Web Page Advanced Admin View SPA-2000 Line 1 Configuration Web Page Line 2 Is Identical SPA-2000 User 1 Configuration Web Page User 2 Is Identical Provisioning Parameters Configuration ParametersSystem Parameters Upgrade Parameters Protocol ParametersSIP T1 SDP Audio Codec Names Parameter Name Description Default NAT Support Parameter Name Description DefaultUser Account Information Parameter Name Description Default Line 1 and Line 2 ParametersSupplementary Services Enable Audio Settings Parameter Name Description Default User 1 and User 2 Parameters Dial Plan Parameter Name Description DefaultPolarity Settings Parameter Name Description Default Speed Dial Settings Parameter Name Description Default Call Progress Tones Parameter Name Description Default Regional ParametersRing and CWT Cadence Parameter Name Description Default Control Timer Values sec Parameter Name Description Default Page Miscellaneous Parameters Parameter Name Description Default Call Statistics ReportingSystem Status Line 1/2 StatusUser Guidelines Call 1/2 StatusBasic Services Enhanced ServicesOriginating a Phone Call Receiving a Phone CallCalling Line Identification Presentation Clip Following Call WaitingTo block Caller ID on all outbound calls, do Disable or Cancel Call Waiting Call-Waiting with Caller ID Voice MailAttendant Call Transfer Unattended or Blind Call TransferCall Hold Three-Way CallingThree-Way Ad-Hoc Conference Calling Call ReturnAutomatic Call Back Call FWD UnconditionalCall FWD Busy Call FWD No Answer Anonymous Call Blocking Distinctive / Priority Ringing and Call Waiting ToneSpeed Calling Up to Eight 8 Numbers or IP Addresses Sipura Technology, Inc Proprietary See Copyright Notice on Where to Get Support Appendix I Dial Plan Administration Dial PlanPage Xxx 4911 1 2-9xx