Sipura Technology SPA-2000 manual Control Timer Values sec Parameter Name Description Default

		.1/9.3)
CWT7 Cadence	Cadence script for distinctive CWT 7	30(.1/.1, .3/.1,
		.1/9.3)
CWT8 Cadence	Cadence script for distinctive CWT 8	2.3(..3/2)
Ring1 Name	Name in an INVITE’s Alert-Info Header to pick distinctive	Bellcore-r1
	ring/CWT 1 for the inbound call
Ring2 Name	Name in an INVITE’s Alert-Info Header to pick distinctive	Bellcore-r2
	ring/CWT 2 for the inbound call
Ring3 Name	Name in an INVITE’s Alert-Info Header to pick distinctive	Bellcore-r3
	ring/CWT 3 for the inbound call
Ring4 Name	Name in an INVITE’s Alert-Info Header to pick distinctive	Bellcore-r4
	ring/CWT 4 for the inbound call
Ring5 Name	Name in an INVITE’s Alert-Info Header to pick distinctive	Bellcore-r5
	ring/CWT 5 for the inbound call
Ring6 Name	Name in an INVITE’s Alert-Info Header to pick distinctive	Bellcore-r6
	ring/CWT 6 for the inbound call
Ring7 Name	Name in an INVITE’s Alert-Info Header to pick distinctive	Bellcore-r7
	ring/CWT 7 for the inbound call
Ring8 Name	Name in an INVITE’s Alert-Info Header to pick distinctive	Bellcore-r8
	ring/CWT 8 for the inbound call
Ring Waveform	Waveform for the ringing signal	Sinusoid
Ring Frequency	Frequency of the ringing signal. Valid values are 10 – 100	25
	(Hz)
Ring Voltage	Ringing voltage. 60-90 (V)	70
CWT Frequency	Frequency script of the call waiting tone. All distinctive	440@-10
	CWT is based on this tone.
Notes:

3.4.7.3.Control Timer Values (sec)

Parameter Name	Description		Default
Hook Flash Timer Min	Minimum on-hook time before off-hook to qualify as hook-		0.1
	flash. Less than this the on-hook event is ignored. Range: 0.1
	– 0.4 sec
Hook Flash Timer Max	Maximum on-hook time before off-hook to qualify as hook-		0.9
	flash. More than this the on-hook event is treated as on-hook
	(no hook-flash event). Range: 0.4 – 1.6 sec
Callee On Hook Delay	The phone must be on-hook for at this time in sec before the		0
	SPA will tear down the current inbound call. It does not apply
	to outbound calls. Range: 0 – 255 sec
Reorder Delay	Delay after far end hangs up before reorder tone is played. 0 =		5
	plays immediately, inf = never plays. Range: 0 – 255 sec
Call Back Expires	Expiration time in sec of a call back activation. Ragne: 0 –		1800
	65535 sec
Call Back Retry Intvl	Call back retry interval in sec. Range: 0 – 255 sec		30
Call Back Delay	Delay after receiving the first SIP 18x response before		0.5
	declaring the remote end is ringing. If a busy response is
	received during this time, the SPA still considers the call as
	failed and keeps on retrying.
VMWI Refresh Intvl	Interval between VMWI refresh to the CPE		0.5
Interdigit Long Timer3	Long timeout between entering digits when dialing. Range: 0 –		10
	64 sec
© 2003 Sipura Technology, Inc		Proprietary (See Copyright Notice on Page 2)	30