Ext IP | External IP address to substitute for the actual IP address of | 0.0.0.0 |
| the unit in all outgoing SIP messages. If “0.0.0.0” is specified, |
|
| no IP address substitution is performed. |
|
Ext RTP Port Min | External port mapping of <RTP Port Min>. If this value is non- | 0 |
| zero, the RTP port number in all outgoing SIP messages is |
|
| substituted by the corresponding port value in the external |
|
| RTP port range. |
|
|
|
|
NAT Keep Alive Intvl | Interval between sending | 15 |
| in sec |
|
Notes: |
|
|
3.4.5. Line 1 and Line 2 Parameters
Per line parameter tags must be appended with [1] or [2] (corresponding to lines 1 or 2) in the configuration profile. It is omitted below for readability.
3.4.5.1.User Account Information
Parameter Name | Description |
| Default |
|
Line Enable | Enable this line for service | Yes |
| |
SIP Port | SIP message listening port and transmission port | 5060 |
| |
Ext SIP Port | External port to substitute for the actual SIP port of | 0 |
| |
| the unit in all outgoing SIP messages. If “0” is |
|
| |
| specified, no SIP port substitution is performed. |
|
| |
SIP TOS/DiffServ | TOS/DiffServ field value in UDP IP Packets | 0x68 |
| |
Value | carrying a SIP Message |
|
| |
RTP TOS/DiffServ | TOS/DiffServ field value in UDP IP Packets | 0xb8 |
| |
Value | carrying a RTP data |
|
| |
NAT Mapping Enable | Enable the use of externally mapped of IP address | No |
| |
| and SIP/RTP ports in SIP messages. The mapping |
|
| |
| may be discovered by any of the supported |
|
| |
| methods. |
|
|
|
NAT Keep Alive | If set to “yes”, the configured <NAT Keep Alive | No |
| |
Enable | Msg> is sent periodically every <NAT Keep Alive |
|
| |
| Intvl> seconds. |
|
| |
NAT Keep Alive Msg | Contents of the | $NOTIFY |
| |
| given destination periodically to maintain the |
|
| |
| current |
|
| |
| If value is $NOTIFY, a NOTIFY message is sent as |
|
| |
| keep alive. If value is $REGISTER, a REGISTER |
|
| |
| message w/o Contact is sent. |
|
| |
NAT Keep Alive Dest | Destination to send NAT keep alive messages to. If | $PROXY |
| |
| value is $PROXY, it will be sent to the current |
|
| |
| proxy or outbound proxy |
|
| |
SIP Debug Option | None, | none |
| |
| REGISTER, exclude NOTIFY, … |
|
| |
Proxy | SIP Proxy Server for all outbound requests |
|
| |
Use Outbound Proxy | Enable the use of <Outbound Proxy>. If set to “no”, | No |
| |
| <Outbound Proxy> and <Use OB Proxy in Dialog) |
|
| |
| is ignored. |
|
|
|
Outbound Proxy | SIP Outbound Proxy Server where all outbound | No |
| |
| requests are sent as the first hop. |
|
| |
|
|
|
|
|
© 2003 Sipura Technology, Inc | Proprietary (See Copyright Notice on Page 2) | 23 | ||