Sipura Technology SPA-2000 manual Regional Parameters

Ring 1 Caller	Caller number pattern to play Distinctive Ring/CWT 1
Ring 2 Caller	Caller number pattern to play Distinctive Ring/CWT 2
Ring 3 Caller	Caller number pattern to play Distinctive Ring/CWT 3
Ring 4 Caller	Caller number pattern to play Distinctive Ring/CWT 4
Ring 5 Caller	Caller number pattern to play Distinctive Ring/CWT 5
Ring 6 Caller	Caller number pattern to play Distinctive Ring/CWT 6
Ring 7 Caller	Caller number pattern to play Distinctive Ring/CWT 7
Ring 8 Caller	Caller number pattern to play Distinctive Ring/CWT 8
Default Ring	Default ringing pattern, 1 – 8, for all callers	1
Default CWT	Default CWT pattern, 1 – 8, for all callers	1
Hold Reminder Ring	Ring pattern for reminder of a holding call when the phone is on-	None
	hook
Call Back Ring	Ring pattern for call back notification	None
Cfwd Ring Splash	Duration of ring splash when a call is forwarded	0
Len2	(0 – 10.0s)
Cblk Ring Splash	Duration of ring splash when a call is blocked (0 – 10.0s)	0
Len2
VMWI Ring Splash	Duration of ring splash when new messages arrive before the	.5
Len	VMWI signal is applied (0 – 10.0s)

Notes:

1.Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the closest match) will be used for alerting the subscriber.

2.Feature not yet available.

3.4.7. Regional Parameters

3.4.7.1.Call Progress Tones

Parameter Name	Description		Default
Dial Tone1	Played when prompting the user to enter a phone		350@-19,440@-
	number		19;10(*/0/1+2)
Second Dial Tone	An alternative to <Dial Tone> when user tries to dial a 3-		420@-19,520@-
	way call		19;10(*/0/1+2)
Outside Dial Tone1	An alternative to <Dial Tone> usually used to prompt the		420@-16;10(*/0/1)
	user to enter an external phone number (versus an
	internal extension). This is triggered by a “,” character
	encountered in the dial plan.
Prompt Tone1	Played when prompting the user to enter a call forward		520@-19,620@-
	phone number		19;10(*/0/1+2)
Busy Tone	Played when a 486 RSC is received for an outbound call		480@-19,620@-
			19;10(.5/.5/1+2)
Reorder Tone1,2	Played when an outbound call has failed or after the far		480@-19,620@-
	end hangs up during an established call		19;10(.25/.25/1+2)
Off Hook Warning	Played when the subscriber does not place the handset		480@-
Tone2	on the cradle properly		10,620@0;10(.125/
			.125/1+2)
Ring Back Tone	Played for an outbound call when the far end is ringing		440@-19,480@-
			19;*(2/4/1+2)
Confirm Tone	This should be a brief tone to notify the user that the last		600@-
	input value has been accepted.		16;1(.25/.25/1)"
SIT1 Tone	An alternative to <Reorder Tone> played when an error		985@-16,1428@-
© 2003 Sipura Technology, Inc		Proprietary (See Copyright Notice on Page 2)	28