Sipura Technology SPA-2000 manual Call-Waiting with Caller ID, Voice Mail

		accepted.
4.2.6. Call-Waiting with Caller ID
Service Description		When the user is on the phone and has Call
		Waiting active, the new caller’s Caller ID
		information will be displayed on the users
		phone display screen at the same time the user
		is hearing the Call Waiting beeps / tones.
User Action Required to Activate or Use		The telephone equipment connected to the
		SPA must support Call-Waiting with Caller ID.
Expected Call and Network Behavior		In between call waiting tone bursts, the SPA
		can generate a Caller-ID signal to the attached
		phone when it is off hook.
User Action Required to Deactivate or End		Not applicable.
4.2.7. Voice Mail
Service Description		Service Providers may provide voice mail
		service to their subscribers. Users have the
		ability to retrieve voice mail via the telephone
		connected to the SPA.
User Action Required to Activate or Use		The SPA indicates that a message is waiting
		by, playing stuttered dial tone when the user
		picks up the handset.
		To retrieve messages:
		Lift the receiver
		Listen for dial tone
		Dial the phone number assigned to the SPA
		You will be connected to the voice mail server
		and prompted by a voice response system with
		instructions to listen to your messages.
Expected Call and Network Behavior		When voice mail is available for a subscriber, a
		notification message will be sent from the
		Voice Mail server to the SPA. When the user
		dials their own phone number, the SPA
		connects the subscriber their voice mail system
		which can then connect them to their individual
		voice mail box.
User Action Required to Deactivate or End		Follow instructions of the voice mail system or
		simply hang-up the telephone.
© 2003 Sipura Technology, Inc	Proprietary (See Copyright Notice on Page 2)		38