Avaya 15-601127 manual Adding a New Speed Dial, To add a new speed dial

Using Speed Dials:

3.1 Adding a New Speed Dial

To add a new speed dial:

1.Press SpDial. If SpDial is not shown and to exit the current screen, press EXIT and then press

Add. If a message appears stating that the speed dial list is full, you must first delete an existing entry before adding any new entry. See Deleting a Speed Dial 26 .

To switch between Name and Number entry, press	next to the item you want to edit. The	options also
change accordingly.

2.With Name selected, begin entering text using the telephone keypad. Each key is marked with the letters and number it provides. You may have to press the key more than once depending on the character you require. For example:

∙The key 2 is also marked as A, B and C. To enter a C, press 2 until C is displayed.

∙If the next character you want to enter is on the same key, press to move the cursor right and then enter the character.

∙By default the first letter is entered in upper-case and the phone then switches to lower-case entry mode. To

change the case of the current character, press Case.

∙To enter a space, press Space.

∙If you make a mistake, press Backspace to delete the character to the left of the cursor.

∙If you have made a mistake in the middle of a character string and do not wish to backspace and re-enter all the characters, press to step back to one character before the point where you wish to edit. Either insert the new

character or press Backspace to delete the character to the left of the cursor.

∙Press * once enters a . (period) or twice a * (asterisk). To enter more than one * (asterisk) or . (period), press

to move the cursor to the right and then enter the character.

∙Press # once enters a – (dash) or twice enters a # (hash). To enter more than one # (hash) or - (dash), press

to move the cursor to the right and then enter the character.

3.When the name is set as required, press Number.

4.Enter the number required using the dialling keypad. For external numbers remember to enter any external dialling prefix required (e.g. 9).

∙To enter a hyphen, press Hyphen. This does not affect the number dialed but may help make numbers more readable.

∙To enter a 1.5 second pause, press Pause. This will appear as a , (comma) character in the phone number.

∙To move the cursor left or right, press and .

5.To save the speed dial and return to the speed dial list, press Save.

6.To return to the speed dial list without saving the changes, press Cancel.

7.To return to the call handling screen without saving the changes, press EXIT.

2420/5420 Phone	Page 25
IP Office	15-601127 Issue 09a (16 July 2009)