User Phone & Pendant
Setup
Volume
Setup
Setup
Press the Setup button (month flashes).
Press the
Press the Setup button (day flashes).
Enter the day using the keypad.
Press the Setup button to confirm the setting.
If you hear “Telephone line disconnected”
Return to the BT In Touch 2000 User Phone and check whether the telephone line cord is still connected to the socket. If disconnected, then reconnect it immediately (see page 17). If the telephone line cord is still connected, then a line fault has occurred and you will need to contact your network service provider (for example, BT) as soon as possible.
Warning alerts
If you hear one of the emergency warning alerts, such as “No mains power” ,“Please change batteries” or “Telephone line disconnected” then you must take the necessary action to rectify the problem.
If you hear “No mains power”
The
If you hear “Please change batteries”
Replace the batteries in the BT In Touch 2000 User Phone as soon as possible. 6 x AA Alkaline batteries are required, see ‘Install (or replace) the batteries’ on page 16.
Important
Before you can use your BT In Touch 2000 User Phone in an emergency:
You must follow the next two sections - ‘Setting up
the emergency facility on your BT In Touch 2000 User Phone’, see page 21 and ‘Registering your BT
In Touch Pendant’, see page 26 - and then test the BT In Touch 2000 package.
20