Ameriphone AMPLIFIED TELEPHONE manual 2C 3F

Special Features (continued)

Programming the Memory Buttons

You can automatically dial twelve programmed telephone numbers using the memory buttons shown in Figure 19. Each button can be programmed (or reprogrammed using the same procedure) for a phone number up to 15 digits long.

M3		M9
M4		M10
M5		M11
M6
	¤
1	A	D
	2B	3E
Figure 19 - Memory Buttons

To program a button, follow these steps:

1.Lift the handset and press PROG as shown in Figure 20.

HOLD*PROG	0		#
		FLASH	REDIAL
TONE	AMPLIFY		VOL
LO	HI

Figure 20 - PROG Button

2.Enter the phone number on the keypad (Figure 21) just as you would dial it normally.

Note: Press REDIAL if you want to insert a brief pause between two numbers.

1 2C 3F

G	J	M
4HI	5 L	6 ON
	K
P	T	W
7RS	8UV	9XY
HOLD*PROG	O	#
	0 PE
		FLASH REDIAL

Figure 21 - Telephone Keypad

3.Press a memory button (Figure

19)to store this number on that button.

4.Immediately hang up the handset.

Note: Any number previously stored at that memory button will be overwritten.

5.To change a stored number, repeat the programming process starting with step 1.

11