AT&T CL4940 Last number redial, To redial a number, To delete a redial entry, Equalizer

Telephone operation

Telephone operation

Last number redial

The telephone stores the last telephone number dialed (up to 32 digits).

To redial a number:

1.To display the most recently called number, press REDIAL/PAUSE when the telephone is not in use.

2.Lift the handset or press SPEAKER to call.

-OR-

1.Lift the handset or press SPEAKER.

2.Press REDIAL/PAUSE to dial the number.

To delete a redial entry:

Redial 885-883-2445

•While the screen displays the redial number, press DELETE X to delete the number from the redial memory. The screen shows Deleted with a confirmation tone.

NOTES:

•The screen shows only the last 15 digits if the number has more than 15 digits.

•If the redial list is empty, you will see Redial empty on the screen and hear an error tone when you press REDIAL/PAUSE.

Equalizer

The telephone equalizer enables you to change the quality of the audio to best suit your hearing.

While on a call, or listening to a message or announcement, press /EQUALIZER to one of the four equalizer settings, Natural (default

setting), Treble 1, Treble 2 or Bass. The screen shows EQ change to Natural, EQ change to Treble 1, EQ change to Treble 2 or EQ change to Bass respectively. The current setting shows on the screen for 2 seconds.

NOTES:

•The current equalizer setting remains unchanged until a new setting is selected.

•If you press /EQUALIZER in idle mode, the telephone shows To change EQ set during call with an error tone.

15