Polycom 8020, 8030 manual Run Site Survey, Diagnostics Mode, Syslog Mode, Error Handling Mode

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

and 802.11 mode are listed. Navigate to the desired level and press NavOK. This sets the transmit power level and exits the Regulatory Domain menus. The Network Setup menu will again display.

Diagnostics

Run Site Survey

The Site Survey mode is activated by selecting this option. The site survey starts running immediately upon selecting this option. See the Diagnostic Tools section for more information about site survey.

Diagnostics Mode

Diagnostics can be enabled or disabled. See Chapter 8 Diagnostic Tools, section Diagnostics Enabled for a detailed explanation of the Diagnostics mode options.

Syslog Mode

See Chapter 8 Diagnostic Tools, section Syslog Mode for a detailed explanation of the Syslog mode options.

Error Handling Mode

The Error Handling mode determines how the handset will behave when an error occurs. The Halt on Error option will cause the handset to stop operating if an error message is received. Unless the error is a fatal one, normal operation may be resumed by power-cycling the handset. The Restart on Error option will cause the handset to make every effort to reboot quietly and quickly to standby mode. In either scenario, a call in progress will be lost.

Error detail may be shown on the display, captured by the syslog server and may also be available for downloading with the Handset Administration Tool.

36 PN: 1725-36038-001_B.doc