Polycom 8020, 8030, 1725-36038-001 manual Dhcp

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

Message	Description	Action
Bad Config	Some needed configuration parameter	Check all required handset
	has not been set.	configuration parameters for valid
		settings.
Bad ESSID	The handset is configured for “static	Enter an ESSID in the configuration
	ESSID” (as opposed to “Learn once” or	settings or change to one of the “Learn”
	“Learn always”), and no ESS ID has	modes.
	been entered.
Bad Phintl File	Handset software download files are	Download new software from the
	incorrect or corrupted.	Polycom website per Software
		Maintenance.
Bad Program File	Handset software download files are	Download new software from the
	incorrect or corrupted.	Polycom website per Software
		Maintenance.
Bad SIP TFTP IP	A bad unicast address has been	Re-enter the correct IP address in the
	entered for the SIP TFTP server in	administrative menus for static IP
	static entry mode.	addresses.
(battery icon),	Low battery.	In call: the battery icon displays and a
Battery Low,		soft beep will be heard when the user is
beep (audio)		on the handset and the battery charge
		is low. User has 15–30 minutes of
		battery life left.
		Not in call: The battery icon displays
		whenever the battery charge is low The
		message Battery Low and a beep
		indicate a critically low battery charge
		when user is not on the handset. The
		handset will not work until the Battery
		Pack is charged.
Battery Failure	The Battery Pack is not functioning.	Replace the Battery Pack with a new or
		confirmed SpectraLink Battery Pack.
		Only SpectraLink Battery Packs will
		work.
Battery Failed	Battery Pack is damaged or	Replace the Battery Pack with a new or
	incompatible with handset.	confirmed SpectraLink Battery Pack.
		Only SpectraLink Battery Packs will
		work.
Can’t Renew	y…y = DHCP server IP address.	Configuration problem. Check the IP
DHCP	DHCP server is not responding to	address configuration in the DHCP
yyy.yyy.yyy.yyy	initial renewal attempt.	server.
Charging …	The handset is charging in the desktop	No action needed.
	charger.
Charge Complete	The handset is now fully charged.	No action needed.
Checking Code	Handset is contacting the TFTP server	None, this message should only last for
	to determine if it has a newer version	approximately one second. If message
	of software that should be	remains displayed, power off and
	downloaded.	contact customer support for a
		replacement phone.

90 PN: 1725-36038-001_B.doc